name
Maslov Gennady Georgiyevich
Scholastic degree
•
Academic rank
professor
Honorary rank
—
Organization, job position
• Kuban State Agrarian University
Research interests
Web site url
—
—
Current rating (overall rating of articles)
0
TOP5 co-authors
Articles count: 21
Сформировать список работ, опубликованных в Научном журнале КубГАУ
-
INNOVATIVE-TECHNOLOGICAL PREREQUISITES OF GRAIN COMPETITIVENESS IMPROVEMENT
Description
The systemic links that depend on mechanization, which affect the growth of the cost price of field crop production were proposed and their analysis was made. Three main blocks of the basic reasons for production costs growth (machinery and materials cost rise, agroecological potential underutilization, agrotechnologies non-observance) disclose agricultural machinery and agrotechnologies of field crops negative aspects that are being used, and also explain agro-potential underutilization causes on the example of the Krasnodar region. The irrational nomenclative list of machines in the current system was analyzed, which not only raises field crop production cost price, but also negatively affects the soil fertility due to its reconsolidation and spraying. Requirements for production processes mechanization means, taking into account their cost price reduction, were formulated. The possibilities for optimizing of the field works timing performed by the proposed agricultural machinery, their quality improving and product damage reducing, as well as work complexity with coinciding terms, streamlining and rhythmicity of processes were formulated. Taking into account the system approach, the imbalance between the agro-industrial complex and management forms was reflected in the weak interrelation of their interests with state interests, which also affects the cost price of production. The negative aspects of the machine system for the mechanization of field crop cultivation were revealed. A special effect should be expected from the proposed combination of technological operations in one pass of the machine across the field due to full-scale adaptations to machines, the ratio of the park of caterpillar and wheel tractors and the work complexity. On the basis of these studies, proposals for traumatization reducing of grain by harvesting equipment and the cost of crop losses from trauma, as well as the regularities of the area of damage to grain from grain vitality have been substantiated. The reasons of production cost price increase are connected with attracting investment issues and managing innovative activities of introducing priority means of mechanization (concessional lending, subsidies, etc.)
-
ULTRA-LOW VOLUME SPRAYER'S PERFEC-TION FOR GARDENS AND VINEYARDS PRO-CESSING
05.20.00 Processes and machines of agroengineering systems
Description
The urgency of the task in creating a reliable plant protection system is the improvement and development of new technologies for spraying crops on the basis of fundamentally new agricultural requirements at a higher quality level, increasing productivity, reducing energy costs and greening protective measures. Pneumatic slotted sprayers have great design capabilities allowing obtaining operating parameters necessary for the specific task of the sprayer. In this regard, we have proposed a technological scheme of the sprayer in the garden-vineyard version. To do this, the sprayers are placed in pneumatic ducts of the fans mounted on the sprayers. It is possible to reduce energy and resource costs, to achieve high quality indicators of the process and to increase the level of environmental friendliness by developing technical means for ultra-low-volume spraying. The principal novelty in solving the problem of ultra-low volume spraying is the use of KubSAU design pneumatic sprayers on the sprayer, and the scheme of the technological process, allowing the reduction of the working fluid and pesticides doses rate, resulting in reduced operating costs to support operations: preparation of working fluids and filling the sprayers. To process two rows simultaneously, it is possible to use sprayers equipped with two centrifugal fans with the installation of pneumatic slit sprayers with fixation in the ducts that they overlap, forcing the air from the fan to pass through the atomizer body, mixing with drops of working fluid. In this case, the speed of the air-droplet jets increases and more efficient use of the air jet from the fan occur. Along with the use of sprayers, equipped with KubSAU design pneumatic sprayers, to combat pests and diseases, we propose to use a sprayer to combat weeds in the trunk area of perennial plantations. Thus we have a family of ultra-low volume sprayers with pneumatic slotted sprayers of the Kuban State Agrarian University design
-
PNEUMATIC SLIT SPRAYER PARAMETERS STUDY
05.20.00 Processes and machines of agroengineering systems
Description
As a result of scientific analysis of the effective plant protection by spraying them with protective-stimulating liquids, the most progressive pneumohydraulic processing method was chosen, enabling the use of a wide mode range. The proposed pneumatic sprayer design can be used to equip sprayers, pollinators and combined units to perform basic operations with the use of pesticides and fertilizers. Using liquid crushing through exposure to working fluid flowing from the feeding tubes of sprayers (jets) with a high-speed air jet, it was possible to carry out the spraying process in a low-volume and ultra-small-volume way in a highly dispersive airborne jets. To study the air-borne jet parameters, providing the working fluid spraying quality as a polydisperse system, we have used a probabilistic-statistical analysis method. It studies variation range of signs according to the classes. Theoretically, the air-borne jet forming process by a pneumatic slit sprayer was considered. Using the three-factor central composite rotatable uniform plan (CURUP), the influence of three factors (surge tank position in cm, air pressure MPa and the feeding tube inclination angle in degrees) on the sprayer performance and the surface response on the working fluid median-mass diameter was determined. It was found that the response surfaces have a form of a paraboloid, the extremum of which is observed at an air pressure of 0.15 MPa (the center of the plan) and the tube installation angle in the spray housing equal to 60 degrees with the middle surge tank position. The maximum coating density of the treated object was 95 pieces / cm2 at the same position of the surge tank and air pressure in the pneumatic line of 0.3 MPa. It was proved that ultra-low volume spraying can be carried out in wide ranges of initial data while observing spraying quality requirements according to the drop median-mass diameter, the average coating density and their distribution uniformity
-
DESIGN FEATURES OF THE NEW CHISEL COMBINED AND CALCULATION NEEDS OF THE ENGINE POWER AT HIS WORK
Description
The article presents technologies and design features of the proposed chisel combined unit, combining in a single pass over the field 3 operations: deep loosening, crumbling additional topsoil and alignment, fertilizing. Design features of such a subsoiller as the basis of the unit include a chisel on each rack, fixed at an angle of 15-25 degrees to the horizontal and lessons along the center line of the rack feet, and flat cutting fun-leveling, consisting of two coaxially bred drums equipped with ripper teeth securely fastened according to our patents and placed in 5-9 rows on the surface of the drums on the helix, with rows of teeth on both drums have the opposite direction. The teeth of the first drum are long by 5-9 cm than the second, the clearance between the teeth of the first and second drum does not exceed 1.5 cm, and the ends of the teeth between the first reel and the cylindrical surface of the second - 1 cm. Front legs each provided with a divider soil laid down by its center and related to the lower of its parts - the bit. The first reel is mounted to 5 cm clearance between it and the cylindrical surface of the soil, which improves process reliability. We have got analytical dependences of the required power for the engine of the tractor unit with the proposed change of the working speed and width at the optimum utilization traction tractor plowing 0.9. We have justified a preferred brand of domestic and foreign tractors for this purpose
-
Description
A methodology for a multilevel system approach to integrated optimization of processes of harvest, transportation and cleaning of the grain during the harvest by the method of «Neveyka» has been developed. The main method of research - is a queuing theory of all components of the yield except straw. The System consists of 6 interconnected subsystems with their inputs and outputs, and its own optimality criteria. On the first level of optimization, the most efficient way of wheat harvest «Neveyka» has been proved. On the second level - the total duration of the harvest with allowance for 4-5 cultivated wheat sorts, each of which is harvested within 5 calendar days, was optimized. The third level proves the requirement of combine harvesters and transport vehicle. On the fourth level - the combinations of harvesting and transport units are optimized on the criterion of the minimum amount of the loss on the mutual expectations of harvesters and vehicles. The fifth optimization level proves the capacity of the reception station of the grain storage, where the main criterion for optimality is the least amount of losses on the mutual waiting time of the transportation vehicles, and the additional criterion is the minimum waiting time of vehicles in the queue. On the sixth and the final stage the specific annual economic effect (rub/ha or rub/t) from the implementation of the proposed technology is determined. It is established, that during the grain harvesting, transporting and processing of heap there are elementary or Poisson probability flows of requirements for service. The Representation of harvesting - transport link in the form of closed queuing system of independent harvesting unit. An approach to the justification of failure-free operation of a station for cleaning grain heap and storage of grain and chaff is presented
-
Description
Using queuing theory (QT) for the new technology of harvesting of grain crops by the method of «Neveyka», the method of optimal designing of maintenance system and elimination of failures of units used in cleaning technology and post-harvest processing of grain has been considered. On the basis of a systematic approach, taking into account the probabilistic nature of the change of operating factors the methodical directions of validity test of the adoption of the Poisson distribution in the calculation of operating modes were substantiated to optimize maintenance level units and eliminate failures in the operation of the machines, the probability of failure-free operation of harvesting and transport aggregates. The probability of failure-free operation of each type of units used in the cleaning of grain depends on their number and intensity of service. According to the numerical value the probability of failure-free operation of units is equal to the probability of idle units for maintenance and elimination of failures. Since it is impossible to determine separately the value of the probability of failure-free operation for all types of units and all kinds of services at different operating conditions the generalized solution has been offered, this solution is applicable to any serviced unit during both the technical inspection and elimination of failures. By specifying the desired value of the probability of failure-free operation of harvesting units, according to their number we can determine the appropriate ratio between the average length of service and the average period of time between incoming service requirements (technical inspection and elimination of failures) from one unit
-
PERSPECTIVE SYSTEM FOR MECHANIZATION OF FIELD CROPS CULTIVATION
05.20.01 Technologies and means of mechanization of agriculture (technical sciences)
Description
In the article we performed an analysis and generalization of the accumulated results of scientific research and best practices in the problem of creating and using machines and technologies in field cultivation of the Krasnodar region; their shortcomings are revealed, as well as ways and means of increasing the efficiency of field crop production through innovative technology machines. Attention is paid to eliminating the violation of agrotechnical, environmental requirements, complexity and quality work performed by serial equipment; unreasonably dependent nomenclature of technical means and high labor costs and means compared with foreign technologies, proposals have been developed for a system of machines for mechanizing field cultivation, which includes the I450 mobile power tool, Belarus tractor 1523 and 890, the fertilizer sprayer TUNAN-1, E5-1, KZR combines -12 and CF-10, a fundamentally new loop of cars for mobile power is based on multifunctional units, assembled from serial single-operation machines according to the inventions of KubSAU, and machine technologies based on the use of multifunctional units strictly comply with the farming system and the fulfillment of the above requirements. The transition of agricultural enterprises to new technologies for the production of field products is justified, including a “non-spring” for cereals, legumes and oilseeds, a new system of tractors and trailed combines that are not inferior to self-propelled, but much cheaper. The new mechanization system provides a breakthrough in the efficient production of crop production in accordance with the estimated technical and economic indicators
-
WHY ENGINE AND TECHNOLOGICAL MODERNIZATION OF AGRICULTURAL PRODUCTION SLOWS DOWN
Description
The tasks set in "The strategy of engine and technological modernization of agriculture until 2020" provide growth of labor productivity by 3–4 times. In our article, we have attempted to concretize in a zone sectional view the direction action for successful engine and technological modernization for the purpose of implementation of such strategically important point. Radical modernization of system of vehicles for complex mechanization of field husbandry based on the domestic equipment in relation to natural and technological conditions of the Krasnodar region is offered. Realization of system of transport is supposed with use of the equipment of the fourth generation, but in 2020 the equipment of the fifth generation and innovative processing methods for production of grain crops has to be realized. It is noted that the solution of such task without the state participation is impossible. The fundamental principles of improvement of system of vehicles for field husbandry and engine technologies are offered. The main of them is a new system of mobile power, new highly productive motorless grain - beetroot-, forage harvesters, new multipurpose units with the offered devices for combination of the technological operations changing labor-intensive technologies radically. We offer replacement of heavy tractors, self-propelled combines; cutting-down of the nomenclature of the equipment at the expense of multipurpose units, main application of fertilizers along with processing of the soil, drop of sealing of the soil and its dispersion. The offered technical re-equipment of branch will provide precision performance of operations, increase in labor productivity and economy of resources
-
IMPROVING THE QUALITY OF MECHANIZED OPERATIONS
Description
The article presents analysis of the problem of increasing the quality of the implementation of mechanized operations to harvest crops and seed dressing chemicals. The quality of grain harvesting combine harvesters was considered for the new modern harvesters in terms of crop losses, grain crushing and microdamages. The quality of seed treatment is considered on the basis of the ejection slot-spraying nozzles at ultra low seed coming down with a conical distribution surface, ending rounded shape logisticians. The problem of improving the quality of the grain harvest is mainly due to its losses for the combine and injury. By the way, the amount of grain crushing almost half its losses determines the percentage of the combine. The greatest fragmentation occurs in the threshing and separating device (LSG) combines with a hammer drums and several times lower - in the axial rotor LSG. At last there is a big advantage - high performance combines that preference when replacing obsolete machines with a hammer apparatus. Quality depends on the etching uniformity of distribution of atomized liquid droplets and completeness of etching. The proposed new flowsheet Dressers fixed flow distribution and ejection-slotted spray solution of the working fluid has significant advantages: reliable processing of seeds, completeness (not less than 97%) and uniformity (98%) of dressing material. Optimal duty cycle flow of seeds created by a fixed cone with an angle of 45 degrees, the spatial arrangement of ejection nozzles relative to the flow of processed seeds provide good quality of work
-
REDUCTION OF TRACTOR DEMAND BY THE USE OF FULL-DRIVE COMBINES IN FIELD WORK
Description
The use of grain-harvesters in field work and their influence on the reduction of machinery demand are given on an example of a typical farm
pdf 1.668.131kb
doc 1.668.131kb