name
Kostenko Mikhail Yurievich
Scholastic degree
•
Academic rank
associated professor
Honorary rank
—
Organization, job position
• Ryazan State Agrotechnological University named after P.A. Kostychev
Research interests
Web site url
—
—
Current rating (overall rating of articles)
0
TOP5 co-authors
Articles count: 24
Сформировать список работ, опубликованных в Научном журнале КубГАУ
-
MODERN QUESTIONS OF POTATO HARVESTING EQUIPMENT PERFECTION
Description
Potato is cultivated in 130 countries on an area of over 18 million hectares; it annually gives more than 300 million tons of tubers. The share of the Russian Federation accounts is about 11% ... 14% of total production. The resulting potatoes consumed in food, animal feed, technical purposes, seed fund. According to the Ministry of agriculture of Russia, the largest number of potatoes in our country (89 %) is produced in peasant farms and personal farms of citizens, the area of cultivation of which make up about 2.7 million hectares. At such farms for the harvest, they use mainly potatodiggers, followed by selection of crops manually. The use of diggers in small areas of planting is more costefficiently in relation to the harvesting combine. In addition, the parameters requested for ATT to damage potatoes when harvesting with the diggers (3%) are higher than during harvesting by combine harvester (5%). As practice shows, for the use of cleaning units, even under optimal harvesting conditions in the hopper of the combine, there are soil and vegetable impurities. There are many different devices intended to localize the problem. Based on the foregoing, we can conclude that it is necessary to pay considerable attention to the quality of work of excavating working bodies, because it affects the productivity of the functioning of the whole machine. Currently, there are widespread potato aggregates with the receiving part, equipped with side disks, spaced along the edges of the plowshares. The disks cut off the raised layer of soil from between the rows. This entails improving the performance of the potato harvester. The most efficient and economical from the point of view of energy consumption, is the work of passive disks with hooks. The quality of potato harvesters depends on the design and performance of excavating bodies. The proposed design solution for an excavating body increases the productivity of harvesting machines
-
Description
In agriculture the issue of enhancing the efficiency of operation of internal combustion engines (ICE), reducing the costs of maintenance (TO) and repairing (TP) fuel supply apparatus (TA) using the improvement of methods and means of diagnosis is a topical in connection with the aging rolling stock farming and lack of investment. Analysis of the known TA diesel engine vehicles systems showed that the most widespread system is the divided type with multiplunger high pressure fuel pump (fuel pump), while the methods of its diagnosing are laborious, they require partial disassembly and have insufficient accuracy. The mathematical models that characterize the work of a high-pressure fuel pump (fuel pump) use a large number of parameters that significantly affect the quality of dynamics of the change of pressure values of diesel fuel. However, in the materials of previously published articles there were no issues considered assessing the extent of the quantitative impact, performance and features change in the sensitivity settings of the mathematical models on the simulation results, there are no recommendations on the degree of sensitivity and importance of each of the parameters. For a more accurate diagnosis of the fuel supply apparatus of a diesel engine it is advisable to use several methods of diagnosing. The article substantiates development of a mathematical model of a high-pressure fuel pump based on the analysis of modern methods of diagnosing of fuel equipment for autotractor diesel engines
-
Description
The article presents a technical diagnostics of a car as a complex of goals and tasks connected with trouble-shooting of mechanisms and systems in order to eliminate them. We have considered the stages of computer diagnostics of different automobile systems such as diagnosing the engine, the brake system, steering and suspension. We have analyzed their components, the ways of troubleshooting and elimination recommendations. The article presents the main troubles transferred from the electronic control unit. The article also presents the stages of diagnosing the engine including external examination, listening to abnormal noises, checking the operating fluids and the engine management system, diagnosing the basic engine systems and checking the cylinders being filled. The article contains the list of main troubles and their reasons. One can also see diagnosing the brake system, its defects and remedies. The article presents diagnostics and repair of the suspender and graphics describing the check of the dismantled shock strut at the stand and tests of the shock strut without being dismantled. We have analyzed computer diagnostics and the problems it solves
-
THE USE OF FOKKER-PLANCK EQUATION FOR ANALYTICAL REASONING OF MIXING PROCESS IN THE SCREW MIXER
Description
In the current economic situation, the developing of cattle breeding is taking on special significance. It is well known that the effective way to develop cattle breeding is to increase the total number of efficient livestock. The numerous researches show that the high concentrated fodder premix diet gives the highest effect in increasing animal indicators [1, 2, 3]. Traditionally, the premix is a powder mass, which should be added into the mixture of grain components. Exact following the recipe of prepared fodder allows the maximum usage of forage potential of the concentrate components [4, 5, 6, 7]. In view of the foregoing, food enrichers have special actuality in making high concentrated fodder [8, 9, 10]. The usage of differential Fokker – Planck equation systems allows determining the laws of the mixing process of various granulated products. As a result, it becomes possible to optimize the technological process of the mixerenrichers of concentrated feed so that the resulting mixture of feed would have high quality and technological characteristics. At the same time the duration of sewer-enricher’s work and, as a consequence, the energy intensity of the technological process would accept the minimum possible values [11-16]. The given theoretical approach is based on the consideration of the motion of an individual particle contained in a loose grain mass (phase). Concerning this, it is necessary to accept a number of assumptions about making effort to the feed particles, and the velocity vectors of its initial motion should be taken into account. Taking into account the complexity of the mathematically derived differential equation, its literal analytical solution seems very difficult. Therefore, the first step of the solution is aimed at the obtaining the non-stationary diffusion equation of Fokker - Planck and the boundary conditions for isolating the only one solution. The second step of the solution is implemented by the tabulation at the grid-based points, that is, considering the differential equation not at a random point of the area, but only at the grid nodes. Moreover, it is necessary to apply the approximation of the derivatives at each node. The solution of the equation system allows determining the module of the minimum, average, and maximum values of the phase particle motion in different parts of the mixing chamber, respectively. In connection with this, the aim of the study is to substantiate the processes of motion of various types of granulated products
-
Description
The effectiveness of disinfection depends on used disinfecting materials for vans, their actions and technological parameters of the installation for applying disinfectants. Hot mist generators provide uniform distribution of particles of disinfectant solution inside the van for transportation of agricultural products. The parameters of the generator of hot mist affecting the quality of disinfection were investigated. Tests were conducted for the vans used to transport agricultural products. For studies we used the vans in operation, which transport farm animals (pigs) and had been disinfected before. Sampling for the research on contamination was performed with pre-prepared swabs. Factorial experiment was planned with using scheme #32, and as a result of significant factors in the univariate experiments we set a temperature of the aerosol disinfectant solution and the duration of surface treatment. As an optimization function we have chosen disinfection efficiency of bodies of vehicles carrying agricultural products. Comparing the results of the experiments on different groups of microorganisms we have found that the optimal mode of hot mist generator with a dispersing device are: the processing time of 1 m2 - 8.5 at the processing temperature - 65º C
-
Description
The mathematical model presented in this article is designed to assess the probability of occurrence probability of technological failure potato harvester according to the specific conditions and usage
-
Description
Condition monitoring is a necessary element of the transport and special machinery in agriculture. The task of the control operations other than the determination of the technical state of the object is to determine the required amount of work, as well as rational amount of collateral the repair of which could be combined with the next maintenance. Based on the results of processing of the information, we may generate requests for service. In the conditions of uncertainty of receipt of requests for servicing of individual machines, estimated volumes and timing, we have am appropriate development of applied technique of justification of the number of diagnostic posts for interactive control of a technical condition of vehicles and special machinery in agriculture. The presented methodology is based on probabilistic methods, and allows the quick optimization of the number of existing posts interactive diagnostics in the enterprise, if necessary, translating the existing posts in "standby" mode, or Vice versa, returning from a reserve in "work" mode. The production and technical base of the enterprise service based on the specific assumptions are considered as a system of mass service (SMO), and the function of such a SMO – as the process of mass service. The process of queuing as applied to interactive diagnosis are "Markov" processes "death and reproduction" with a finite or countable number of States and continuous time. To describe the states of the system we use the system of the Kolmogorov equations for steady state of "Markov" process. On their basis, we have determined average queue length, time of stay orders in the queue, number of busy channels and the bandwidth of the CFR. Using the intensity of the requests and the service time of a single application for specific equipment, the article establishes the efficiency of online diagnosis posts. The result of the proposed applied methodology enables timely decision-making about the need for reconstruction or technical re-equipment of the company
-
SOME ASPECTS OF REDUCING FRUIT DAMAGE DURING HARVESTING AND TRANSPORT OPERATIONS
Description
Fruit harvesting is the final and decisive operation in the general work plan for growing fruit, which largely determines the qualitative and quantitative indicators of production and economy of industry in general. Increasing productivity by improving the safety of fruits and vegetables is a priority and not an easy task. For example, the use of cleaning technologies with the use of machinery for harvesting of apples by shaking can significantly reduce the time of gathering fruit compared to hand harvesting. This technology may be applicable, if the fruit is grown for the manufacture of juices, jams, etc. Currently, in several European countries and in the USA, they widely use fruit harvesting platforms and machines. The leader in the production of fruit harvesting platforms is Italy. To reduce the damage to fruit in agriculture, the analysis of the traumatic factors is of great importance, with the analysis of available machines and their subsequent modernization with the aim of improving the reliability and quality of harvesting and transport process, taking into account of the algorithm for solving these problems, the creation of new varieties of fruits and vegetables suitable for machine processing, strict compliance with deadlines and agronomic requirements for the performed technological operations, taking into account the savings of energy and resources when using mobile technology. In addition to the modernization of the machines for efficient operation, it is necessary to improve also the scheme of planting of gardens and methods of cultivation, transfer horticulture to intensive way of development
-
JUSTIFICATION OF THE RIGIDITY OF COMPOSITE BARS OF A POTATO HARVESTER ELEVATOR
05.20.01 Technologies and means of mechanization of agriculture (technical sciences)
Description
High-strength steels are used to increase the reliability of potato harvesters. With the advent of new materials and new technologies in agricultural engineering, it is possible to significantly reduce the mass of working bodies, to reduce energy costs. The elastic system of the composite elevator bar, unbalanced by the impact of the component of the potato heap, is in oscillatory motion. An increase in the height of the fall, and hence the speed of collision with the bar of the component of the potato heap, determines the amount of deflection of the composite bar. During vibrations, in addition to static deformations, dynamic ones are added, depending on the magnitude of the impact force. It was established that a bar made of composite material should have the following parameters: elastic modulus E = 55000 MPa; the diameter of the composite bar d = 0,012 m
-
Description
The role of transport in agricultural production is significant. It is the connecting link in the technological chain of the agro-industrial complex (of the APC). On-farm transport in the APC together with cars and tractor transport are widely used. The rationality of the use of wheeled tractors for farm transport substantiates the possibility of their movement on asphalt and on dirt roads. The specific gravity of the tractor transport in the domestic agriculture is 22-27% of the total volume of transport and 50-60% of the volume of farm traffic. A high level of use of tractor transport has been observed in the countries of Western Europe and the USA. In the farms of leading countries of Western Europe (Germany, Italy, France, etc.) about 70- 90% on-farm transport of agricultural goods is done by tractor transport. Tractor transport in a live environment is running on roads with varying terrain, a wavy profile cover, on soils with different hardness and humidity. When driving vehicles at high speeds, the trailer is wobbling from side to side, constantly accompanying tractor transport during its operation. As a result, it is bad for propulsion, transmission, and it deteriorates the dynamic performance properties of equipment, working conditions of the operator. To reduce the amplitude of oscillations of the trailer, the operator is forced to work strenuously with the steering wheel or to slow down the speed, which in turn affects operator fatigue, as well as the performance and maneuverability of the vehicle. Thus, advanced technologies in electronics, sensor technology and software will determine the nature of agro-technical innovations and will lead to increased automation of business processes in crop production with the aim to organize the work more effectively, efficiently, accurately, environmentally friendly and economically feasible. When working with intelligent technologies, understanding the development of high-tech, precision engineering requires a revision to the personnel policy and education in agriculture, which should be based on the relevant organization of farms and their proper new type engineering solutions
pdf 419.555kb
doc 419.555kb