№ 110(6), June, 2015
Public date: 30.06.2015
Archive of journal: Articles count 121, 265 kb
-
MICROSTRUCTURE OF MODEL SYSTEMS BASED ON FERMENTED RAW MATERIALS
Description
In the research we have given a detailed description of certain structural components of the model system when adding fermented raw material into it. As the raw material we used collagen containing by-products of bovine animals of the 2nd category – lips and ears were used. The lactulose syrup and linseed flour were used as growth-promoting substances. The fermentation of the raw material was conducted by freeze-dried starter of the bacteria of Propionic Culture PS–4 and Probio–Tec ВВ–12, and also bacterial concentrate Bifilact-Pro. The fermentation parameters: the temperature 37°С, the time of the fermentation is 3 hours. The changes, taking place in the tissues under the biotechnological processing, were established with the method of the histological samples test. As the result of the conducted microstructure tests of prototypes it was determined that in the biomodification process under the influence of the propionic and bifidus bacteria marked changes occurred in the histological structure of modeling systems in the comparison with the control sample. At the same time it was ascertained that under the influence of the ferment processing a loosening of collagen fascicles happens to isolated fibrils and their fragmentation occurs. As the result, when composing protein compositions an emulsion (which is homogeneous by the structure) comes out. In the future it is recommended to use the emulsion in the receipts of boiled sausages and minced half-finished goods
-
Description
The research is devoted to the problem of choosing the best methods for assessing the economic efficiency of information technologies. Using the Kemeny median is proposed to solve this problem. This method will allow to obtain the ranking of methods of evaluating of IT effectiveness by various criteria. The existing methods of valuation of economic efficiency of information technology were systematized in the article. Preliminarily, all the methods were divided into three groups: financial, probabilistic and qualitative analysis tools. The advantages and disadvantages of methods, their purpose, use and limitations were also considered. As a result of systematization, it was concluded that there were some limited and one-sided methods. No single method allows to assess comprehensively the effectiveness of an information technology. Obviously, the methods should be considered in the system. But for this they need to be ranked. In order to obtain the ranking the method of Kemeny median was used. In the beginning the expert evaluation of methods by the eight proposed criteria (taking into account the specificity of the original data, validity, unambiguity, information content, exactness, complexity, the access to information, the cost) was carried out. Next, the search of the group ranking was carried. The matrix of losses was compiled. The problem of appointments was solved in MS Excel. At the end, the matrix of paired comparisons has been obtained. This matrix helped to determine the final ranking of alternative methods. Therefore, using the Kemeny median allowed us to prioritize the use of methods of evaluating of the effectiveness of information technology
-
INDUSTRIAL DEVICE FOR THE ELECTROCHEMICAL ACTIVATION OF WATER
Description
We describe a stationary industrial plant for electrochemical activation (ECA) of the water created on the creamery of "Yuzhni Polyus" in Kropotkin. It includes 4 diaphragm reactor - electrolyzer of a dielectric material volume of 200 liters each, control cabinet, power electrical equipment, water supply system, containers for activated water, pumping equipment for its transport and ventilation system. The anode and cathode chambers are separated by ion permeable diaphragm reactors of cotton filter cloth. The reactors operate pairwise in succession, one pair in the production mode, the other - in the mode of preparation. The anode is made of titanium sheet; the cathode is made of stainless steel 12HN9T. In the selection of the electrode material we used mass-spectrometric investigation of the chemical element composition of water before and after electrochemical activation. The device produces alkaline catholyte 15.84 m3 / day (pH 10,4 ÷ 11,71) and acid anolyte 3.36 m3 / day (pH 2,24 ÷ 3,1). Using the created device (power consumption –11,4 kW ∙ h / t) meets the basic requirements of production – resource conservation, environmental safety, high performance and ease of use. These circuit diagram and photos of the installation allows reproducing it in other enterprises, contributing to the wider application of electrochemically activated water
-
MODERN METHODS OF SCIENTIFIC JOURNALS IMPACT EVALUATION
Description
The purpose of the research is the development of new methods of the estimation of the importance of scientific journals. It is known that for assessing the significance of scientific journals it is used a universally recognized impact factor, which reflects the average number of citations to the articles published in the magazine for a certain period of time. For a more objective assessment of the significance of the journal in the scientific community we use such indicator as the index of efficiency, which reflects how quickly the articles in the scientific community published in the journal become known and recognized. At the same time, the impact factor as one of the scientometric indices has inherent definite disadvantages, the main of which - the stimulation scientific edition to the artificial reduction of the number of published articles, instead of increasing demands to improve their scientific level. It is necessary to develop a method of assessing the significance of the journal for the scientific community, preserving the dignity of the impact factor and reduce its disadvantages. Application of extra scientometric indicators, in addition to the impact factor and the index of efficiency, will allow assessing the importance of the journal for the scientific community more objectively. Methodological bases of the research are: a systematic approach (considering science as a social institution in close connection with the society as a whole), metasystem approach (considering the scientific community as a metasystem, i.e. a system with a relatively independent components), qualimetric approach (considering the importance of the scientific journal as a latent variables that reflect a variety of criteria), sociological approach (considering the scientific publication as a social system, the intensity of interaction with other society)
-
OPTIMIZATION OF CONGESTION OF ROAD NETWORKS
Description
Definition of the directions of development of transport system of the city is to ensure objectively justified needs for movement of goods and people on the territory of the city. Transport planning of the city is in direct connection with the planning of territories. The transport planning issues are resolved immediately after the planning of the city. Transport planning is based on the provisions of the General plan of the city. Organization of urban traffic should be considered as a continuous process of forecasting – planning – design – construction. In the organization of road traffic, public passenger transport should be considered as a priority, as an alternative to a car, even with a certain amount of discrimination. Among the possible solutions to the questions of organization of traffic at signalized intersections include the use of multi-program traffic lights regulation (at least three programs) that allows you to change the duration of a traffic light cycle, permitting phases at a fixed value of the cycle and intermediate cycles depending on clock download site. Equipment management systems of traffic on the road network, modern technical means of regulation. The definition of "acceptable system of urban road traffic is largely dependent on the degree of customer satisfaction (the movement). And it varies. It is influenced by many factors, such as the size of the urban agglomeration. It is quite clear that it is impossible to achieve the same results in settlements with population more than 1 million people and less than 100 thousand
-
NECESSARY CONDITIONS FOR THE DEVELOPMENT OF A CONTROL LIGHTING SYSTEM
Description
Automated lighting control system designed for use in public buildings; they perform actions typical for this kind of products. Accurate maintenance of artificial light in the room at the set level. This is achieved by having a lighting control system with a photocell inside the room and controlling the lighting system illumination. Even only one this function allows you to save energy due to the cutoff of the so-called "excess light". Calculating natural light in the room. Despite having the vast majority of premises with natural lighting in the daytime, the power of the lighting system is calculated excluding. If you maintain illumination created jointly by a lighting system and natural light, at a predetermined level, it is possible to further reduce the power of the lighting system at each moment of time. At certain times of the year and hours of the day, perhaps it is enough to use just natural light. This function can be carried out by the same solar cell as in the previous case, provided that it tracks the full (natural + artificial) illumination. In this case, the energy savings can be at 20 - 40% level
-
FEASIBILITY STUDY AND IMPLEMENTATION OF PRODUCTION OF ELECTROACTIVATORS
Description
The feasibility study is required in determining the effectiveness of the implementation of electrotechnical products. The main aim is to determine the magnitude of the economic effects of using key and related results in agriculture. The article presents a feasibility study of production and implementation electroactivator device in the production of 5 units monthly, 60 units per year. It is the device cost calculation based on investment, energy costs and wages. Capital investment in new plant is the cost of materials and installation. The magnitude of the value of individual elements of the unit is determined by the price lists. Determining the cost-effectiveness and technical feasibility in the production when introducing electrified units involves additional investment and operating costs, this is reflected in the cost of production. The comparison was made for the device with a new electroactivator developed in KubSAU and using chemical means of Lakmus. Calculations of economic efficiency of investments for the farm which has 225 hectares of arable land have shown that basic income will be obtained by reducing operating costs. Net present value was determined for different levels of the bank rate and inflation
-
ENERGY-LOADING OF DISKS IN FRICTION PAIRS OF “DISC-PAD” OF BRAKING DEVICES IN VEHICLES (part two)
Description
In the materials of the article we mention the regularities of changes in the volume and surface solid temperature gradients and self-ventilated brake discs and illustrate their impact on the main operating parameters of the friction pairs of disk-to-pad brakes of the A 172 bus; the relationship between thermo-physical parameters of polished and matte surfaces with areas of brake discs of various types. The influence of the type of tests on the pairs of loaded with energy friction disk and pad brakes of the vehicle. We have set the intensity of heat exchange processes from the surfaces of the brake discs of various types. It is shown that this leads to increased surface temperature gradient. The volume and the surface temperature gradients of the brake discs were determined with the involvement of the hypothesis of summation of temperatures on the surface when you post the generated electric currents. It was found that in the surface layer of the working surface of a solid brake disc at its pulse heating under the influence of the temperature of the flash nucleate cracks due to the thermal fatigue of the material of the disk. The features of the design of the brake discs were considered as well. On the basis of the calculation and the experimental data we have shown a correlation between the emissivity of brushed and polished surfaces and their areas in the disk-to-pad brakes when using solid and self-ventilated discs
-
EFFECT OF ELECTROMAGNETIC FIELD LOW FREQUENCIES IN THE TECHNOLOGY OF DRYING MANGOES AND PAPAYAS
Description
The intensity of drying process depends on the speed of movement of the moisture inside the object and the speed of its removal from the surface. To accelerate the drying process, temperature gradient is often regulated, which causes large power consumption. Currently, they are different methods in used for intensifying the process of drying of plant material which are physical, mechanical, chemical and electrical method. Data of literature review show a lack of data on the impact of synergies of lower frequency on the efficiency of drying plant material. Accelerating the drying process of fruit can be achieved by combining low – temperature of drying with a synergistic lower frequency of electromagnetic field. The results of the studies on the development of technologies to accelerate the drying process of mango and papaya fruit are presented in this article. The role of the electromagnetic field, on the intensification of the drying process and on the inhibition of the microflora of mango and papaya, during drying is studied. Effect of the synergistic electromagnetic fields of different frequencies leading to the death of microorganisms, as well as the drying rate of mango and papaya fruit is analyzed. The optimal technological parameters of low frequency electromagnetic field on drying of mango and papaya fruit are determined. Biochemical changes of mango and papaya fruit during drying are given. Technological parameters of the powder mango and papaya obtained by combining low temperature treatment with the synergy of low frequencies are described
-
Description
The article looks at the current state of energy in Vietnam and the selection of new Russian steam turbines for operation in combined gas-steam plant in Vietnam. The calculated results of thermal performance scheme 3x1 with combined gas-steam plant 1090 MW based on the Russian steam turbines K-330-240-2 and on the steam turbines TS2A40 Mitsubishi (station PhuMy-1, Vietnam). It also looks at the influence of the efficiency of high-pressure cylinders of Russian steam turbine K-330-240-2 on the efficiency and power of a gas-steam plant 3x1 with 1090 MW, increasing the efficiency of high-pressure cylinder of steam turbine through the use of honeycomb seals in flow part
pdf 270.808kb
doc 270.808kb