№ 154(10), December, 2019
Public date: 30.12.2019
Archive of journal: Articles count 33, 93 kb
-
05.13.10 Management in social and economic systems
DEVELOPMENT APPROACHES TO GAMIFIED APPLICATIONS
05.13.10 Management in social and economic systems
Description
The article discusses the development approaches to gamified applications, the rules for their script designing and the user involvement principles into the gameplay. The work provides practical examples for main phases of the software design with full or partial gamification. There are conclusions made about the feasibility of using mixed approach in gamified software development and there are recommendations given for developers and IT-customers to increase the commercial effectiveness of gamified software
-
05.13.10 Management in social and economic systems
Description
The management of the process of implementation of projects at the refinery should be carried out comprehensively. To improve the diagnostic system of insulation of the stator windings of electric motors with a voltage above 1 kilovolt, it is necessary to involve specialists of all sub-divisions. This will allow a comprehensive approach to the problem of reducing the intensity of labor, and, consequently, to reduce the norms of time for performing operations provided for by the technological process. It is proposed to create a project team consisting of the following specialists: General Director, chief designer, chief electrician, lead engineer for adjustment and testing, Deputy Director for production, head of the Department of labor and wages, chief economist. In addition, the design should involve the heads of shops and sites, directly managing and organizing processes in the workplace. Domestic and foreign experience shows that the introduction of diagnostic tools is one of the most important factors in increasing the economic efficiency of the use of equipment in the industry. Purpose of diagnostics is identification and prevention of failures and malfunctions, maintenance of operational indicators within the established limits, forecasting of a condition for the purpose of full use of a resource
-
05.13.18 Mathematical modeling, numerical methods and software complexes
05.13.18 Mathematical modeling, numerical methods and software complexes
Description
The economic and operational reliability of building structures to a large extent depends on the preservation of the bearing capacity of thin-walled structures, in particular, rods with viscoelastic properties. The presence of invisible microdefects in them can lead not only to a decrease in the bearing capacity, but also to the destruction of structures. For the detection of microdefects by acoustic diagnostic methods, it is necessary to know the dependence of the longitudinal strain wave velocity on the rheological properties of the structural material. Such dependences can be revealed by the construction and analysis of mathematical models describing viscoelastic deformation waves formed in rod systems made of a material with rheological properties
-
METHODOLOGY OF OPTIMAL PLACEMENT OF TRADE NETWORK OBJECTS
05.13.18 Mathematical modeling, numerical methods and software complexes
Description
The article outlines the idea of a methodology for locating distribution centers of a spatially distributed distribution network without restrictions on the territory. In the past fifteen years in Russia, the profitability of offices and retail space has been significantly higher than logistic complexes. At present, it is possible to talk about a change in the investment attractiveness of the segment of distribution centers and storage facilities. The method consists in solving three problems: determining the number of distribution centers that need to be placed using the method of comparing options; determination of the best locations for placement of distribution centers using the ant colony algorithm; identification of the best location from the previously determined ant colony algorithm using the penalty function method. This method of optimal placement of objects of a spatially distributed complex can be applied not only to the distribution network, but also to any transport company with distribution centers, for example, a logistics company, delivery services, etc.
-
05.13.18 Mathematical modeling, numerical methods and software complexes
Description
The research purpose is identification and justification of the scientific team’s recognition citation-based criteria. Such parameters of the educational environment as modality, latitude, social activity, social coherence, intensity, maturity etc. are assessable on the basis of the primary information about the scientific team’s research activity results. The authors of this article prove that the data about cross-citations within a scientific team is the primary information about the scientific and pedagogical team members’ recognition of their social system (such information is obtainable from modern scientometric databases, e.g. Russian Science Citation Index). The new scientific results of this research are the identified citation-based criteria for the scientific team’s recognition. The theoretical significance of these results is the possibility of using them as a scientific basis for further research in the sociology of science and for the development of the small social systems functioning models; the practical significance is the possibility to analyze the factors for the success of scientific and pedagogical teams’ research activity (i.e. applicability for the research activity monitoring systems). The research methods are: the methods of set, relations and graph theory, the methods of qualimetry, mathematical statistics (including the scree-plot method) and linear. The research methodology is based on the sociological approach (viewing the scientific and pedagogical team as a well-established social system), the qualimetric approach (declaring the necessity for the multicriterial diagnostics of scientific and pedagogical team’s recognition) and the probabilistic and statistical approach (viewing the scientific and pedagogical team’s recognition citation-based diagnostics as a statistic measurement)
-
FRAME EXPERT SYSTEMS USING NEURAL NETWORKS
05.13.18 Mathematical modeling, numerical methods and software complexes
Description
The study was carried out with the financial support of the RHNF as part of the research project of the RHF RFBR 17-02-00475а "Application of metaheuristic algorithms for solving direct and inverse problems of optimizing the management of spatially distributed complexes"). The article discusses the use of artificial neural networks in frame expert systems, which in some cases make it possible to bypass a number of limitations of the standard version of frame expert systems. Several options for using neural networks in frame expert systems were considered and a number of tasks to be solved for each
-
DETERMINATION OF VIDEO IMAGES DELAY TIME
05.13.18 Mathematical modeling, numerical methods and software complexes
Description
Video camera is the source of the image of the object selected for observation or protection. Video cameras are used to collect information, being sometimes indispensable device. When analyzing images, it is important that the condition for the accurate operation of the video frame transmission system is fulfilled. All cameras have a slight delay in image transmission. For image analysis, it is important to know the delay time
-
05.13.19 Methods and systems of information protection, information security
MATHEMATICAL MODELING OF PSP SENSOR SYNCHRONIZATION ON LOW QUALITY CHANNELS
05.13.19 Methods and systems of information protection, information security
Description
The purpose of this work is to find the boundary estimate of the synchronization of PSP sensors in low-quality channels according to the method of the test segment (OST), independent of the distribution of errors in the channel
-
05.20.01 Technologies and means of mechanization of agriculture (technical sciences)
PROSPECTS OF APPLICATION OF LASER SURFACING AT RESTORATION OF DETAILS OF AGRICULTURAL MACHINERY
05.20.01 Technologies and means of mechanization of agriculture (technical sciences)
Description
The main component of agricultural production is machinery, which is a complex technical system (harvesters, agricultural machines, tractors, cars, etc.). The practice of operation of technically complex machines shows that, in general, the process of replacing worn parts and working devices of agricultural machinery with new ones prevails, and the number of restored products is small. However, experience shows that the technological process of restoration of machine parts allows you to get high quality surfaces of such parts and reduce the cost of repair. One of effective methods of restoration of surface layers of details is gas-flame spraying with the subsequent laser reflow. The article presents the results of the study of the zone of thermal influence in steels U8A and St3, as well as the influence of laser reflow regimes on its microhardness in these steels. It is established that the higher the laser power and the lower the speed of movement of the optical head, the larger the size of the thermal influence zone. Conversely, the lower the power of the laser and the higher the speed of movement of the head, the smaller the size of the zone of thermal influence. The power of the laser and the speed of movement of the optical head slightly affect the value of microhardness. It was also noted that promising areas in the field of restoration of parts of agricultural machines laser welding are: a scientific rationale for the selection of powders; the study of regularities of changes of the microstructure parts, regularities of formation of layers; development of modes and justification of regimes of welding; and, ultimately, the development process of restoring the specific parts
-
05.20.01 Technologies and means of mechanization of agriculture (technical sciences)
Description
The problem of linear motion of agricultural transporting vehicle (ATV) without satellite systems is a complex and difficult task. The consequences of non-linear movement associated with irregularity fertilizing, non-compliance between the rows and irregularity plowing leads which will leads to unnecessary costs for operating materials, which will causes significant economics damage to agricultural enterprises. In this case. In this article, we have presented theoretical foundations of simulation modeling of the course motion of the ATV taking into account wheel slipping for analyzing the effects of non-linear motion. There were also some results of checking their adequacy from field tests
pdf 407.910kb
doc 407.910kb