Ryazan State Agrotechnological University named after P.A. Kostychev
Author list of organization
List of articles written by the authors of the organization
-
MODERN QUESTIONS OF POTATO HARVESTING EQUIPMENT PERFECTION
Description
Potato is cultivated in 130 countries on an area of over 18 million hectares; it annually gives more than 300 million tons of tubers. The share of the Russian Federation accounts is about 11% ... 14% of total production. The resulting potatoes consumed in food, animal feed, technical purposes, seed fund. According to the Ministry of agriculture of Russia, the largest number of potatoes in our country (89 %) is produced in peasant farms and personal farms of citizens, the area of cultivation of which make up about 2.7 million hectares. At such farms for the harvest, they use mainly potatodiggers, followed by selection of crops manually. The use of diggers in small areas of planting is more costefficiently in relation to the harvesting combine. In addition, the parameters requested for ATT to damage potatoes when harvesting with the diggers (3%) are higher than during harvesting by combine harvester (5%). As practice shows, for the use of cleaning units, even under optimal harvesting conditions in the hopper of the combine, there are soil and vegetable impurities. There are many different devices intended to localize the problem. Based on the foregoing, we can conclude that it is necessary to pay considerable attention to the quality of work of excavating working bodies, because it affects the productivity of the functioning of the whole machine. Currently, there are widespread potato aggregates with the receiving part, equipped with side disks, spaced along the edges of the plowshares. The disks cut off the raised layer of soil from between the rows. This entails improving the performance of the potato harvester. The most efficient and economical from the point of view of energy consumption, is the work of passive disks with hooks. The quality of potato harvesters depends on the design and performance of excavating bodies. The proposed design solution for an excavating body increases the productivity of harvesting machines
-
Description
In agriculture the issue of enhancing the efficiency of operation of internal combustion engines (ICE), reducing the costs of maintenance (TO) and repairing (TP) fuel supply apparatus (TA) using the improvement of methods and means of diagnosis is a topical in connection with the aging rolling stock farming and lack of investment. Analysis of the known TA diesel engine vehicles systems showed that the most widespread system is the divided type with multiplunger high pressure fuel pump (fuel pump), while the methods of its diagnosing are laborious, they require partial disassembly and have insufficient accuracy. The mathematical models that characterize the work of a high-pressure fuel pump (fuel pump) use a large number of parameters that significantly affect the quality of dynamics of the change of pressure values of diesel fuel. However, in the materials of previously published articles there were no issues considered assessing the extent of the quantitative impact, performance and features change in the sensitivity settings of the mathematical models on the simulation results, there are no recommendations on the degree of sensitivity and importance of each of the parameters. For a more accurate diagnosis of the fuel supply apparatus of a diesel engine it is advisable to use several methods of diagnosing. The article substantiates development of a mathematical model of a high-pressure fuel pump based on the analysis of modern methods of diagnosing of fuel equipment for autotractor diesel engines
-
ANALYSIS OF METHODS AND MEANS OF DIAGNOSTICS OF BRAKE SYSTEMS OF VEHICLES
Description
The article presents native and foreign bench-top and board methods to test the automobile break systems. One can find information about some native trailer-break stands. We have analyzed their advantages and drawbacks such as low information capacity, high diagnostics processing time, low quality of regulation and maintenance operations due to big influence of the operator’s experience, his knowledge and individual characteristics, and great instability of manual test modes on the results of the investigations. To remove these shortcomings they have had some experiments at MADI in order to develop the module to the brake qualities stand. When using it one can have automatic diagnoses and flow chart is presented in the article. Due to the existing vehicles’ state inspection mode and diagnostic means in our country there appeared new stands for brakes control. One can attribute to these devices a range of brake qualities stands developed and produced at Novgorod plant GARO. These are STS-3, STS-10 and STO series stands for cars, trucks, buses and micro-buses. The article also presents some foreign stands used in Russia such as universal brake stands STM by META firm, the break stand IW7 Eurosystem by MAHARUSSIA firm. We have presented in the article the results of the analysis of simple and complicated board means of diagnosis as “Eftor-2”, “Effect”
-
Description
The development of agricultural production inevitably entails an increasing volume of traffic and a turnover of goods. Therefore, the issues of increasing transport efficiency, reducing the price of transportations and improving productivity acquire great importance. In most cases, supersize dump trucks used for the transport of agricultural production have much more than 6 tons axle load. Thus, these cars need to have roads with improved surface to each field, which undoubtedly is a significant drawback. Because of the extra movements of harvester dump trucks on the turning strip at the end of the field, it increases expenses of damage and loss of crops and the arrival of heavy machinery in the field leading to soil compaction, that in the end affects the future crop. Transportation of agricultural commodities is most effective when the car arrives directly to the harvester machinery. Such vehicles must have sufficient abilities and capacity of the body comparable with the volume of a combine hopper and has no significant impact on soil sealing. With this method, harvesters do not make extra movements and are not idle. Basic requirements for vehicles used in the harvesting potatoes, are in a more productive use due to increasing the capacity and reducing downtime when loading or unloading and minimizing the level of damage to other tubers. For the transportation of agricultural products there is a different transport technology, which either do not fully meets the requirements of transportation of highly fragile product, or has a significant cost. Therefore, we require a specially equipped vehicle bodies, with a competitive ability in the range acceptable to the Russian Federation. As one of the innovative developments, this article proposes a tipper body of the vehicle for transportation of highly fragile agricultural products. The proposed design solution for the tipper ensures a uniform unloading of transported products from the vehicle body and prevents arching issues
-
Description
The results of theoretical studies presented in this article is intended to familiarize with perspective direction of improving quality of work potato harvesters by improving the working bodies of separation
-
Description
This article deals with the rules of observance of agriculture technology requirements for the production of potatoes in particular. On the example of the combine PDA 1.2, we have considered the places having the greatest damaging effect on roots. One can also find a summary procedure for calculating the probability of defective products
-
Description
The article examines the issues of increasing the efficiency of the system of technical operation of mobile agricultural machinery by means of monitoring the state of units and aggregates of the latter through diagnostics. The problems of complex diagnostics of diesel fuel equipment are investigated. The urgency of diagnosing a fuel injection pump without dismantling from the engine is shown from technical, economic and environmental points of view. The effect of operational malfunctions of some devices of fuel equipment on parameters of its operation as a whole is analyzed. On the basis of the analysis of diagnostic devices application, their grouping is suggested. The parameters to be studied in connection with peculiarities to decide whether it is possible to estimate the technical state of the fuel injection pump without dismantling from the internal combustion engine are indicated. Based on peculiarities of the fuel injection pump technical state estimation, a research program is developed and the results of the research are presented. Specific features of testing the fuel injection pump are indicated. Analysis of the results of the research shows that a smaller error in the change of the cyclic fuel feed rates supplied by the fuel injection sections takes place at the engine speed corresponding to the indicated power. The conclusion is made that the presented research results can be used as a basis for developing a technique (technology) for diagnosing the fuel injection pump without dismantling from the internal combustion engine
-
Description
An integral part of technological process for the cultivation of agricultural crop is the transportation. It requires significant energy and labor costs. The statistics show that the proportion of expenses for transportation of goods in agriculture reaches 25-40% of the total costs for the production made, when the proportion of farm tractor transportations reaches 60% of the total. Thus there are considerable losses of production, reaching in separate cases up to 50%. They are especially high in the harvesting and post-harvest cycles of crop production which is connected with crop damage during transportation. The quality of fruits and vegetables during the harvest depends on the technology of its collection and transportation. Due to the rapid deterioration of most agricultural products, agricultural producers have the task in careful transportation of the fruit. A huge role in the preservation of the product is its harvesting and packing into containers. In Russia we use wooden boxes, and foreign farmers use containers, whereby they have higher productivity and preservation of fruits. The type of vehicle, the time of a day and the air temperature also have a large impact on crop damage. In Soviet times, various technologies have been developed for harvesting and transportation of the harvest to consumers using various types of forklifts, harvesters and vehicles. In our time, it requires the development of new technologies for harvesting and transportation of agricultural products to achieve a higher level of automation and high profitability of agricultural production
-
Description
The article presents a technical diagnostics of a car as a complex of goals and tasks connected with trouble-shooting of mechanisms and systems in order to eliminate them. We have considered the stages of computer diagnostics of different automobile systems such as diagnosing the engine, the brake system, steering and suspension. We have analyzed their components, the ways of troubleshooting and elimination recommendations. The article presents the main troubles transferred from the electronic control unit. The article also presents the stages of diagnosing the engine including external examination, listening to abnormal noises, checking the operating fluids and the engine management system, diagnosing the basic engine systems and checking the cylinders being filled. The article contains the list of main troubles and their reasons. One can also see diagnosing the brake system, its defects and remedies. The article presents diagnostics and repair of the suspender and graphics describing the check of the dismantled shock strut at the stand and tests of the shock strut without being dismantled. We have analyzed computer diagnostics and the problems it solves
-
DIAGNOSTICS OF THE MOBILE AGRICULTURAL TECHNIQUES USING THE DEVICE OF THE «SAMTEC» COMPANY
Description
The issue of the article is the procedure of diagnostics of the mobile agricultural techniques based on the implementation of the automatic control electronic systems. In particular, a ternary circuit is being created for the analysis of diagnostic protocols, which allows facilitating the specifying of the protocols, including compiling of documents describing the basic parameters, the structure and the constants of diagnostic protocols
pdf 419.555kb
doc 419.555kb