name
Kokorev Gennady Dmitrievich
Scholastic degree
•
Academic rank
associated professor
Honorary rank
—
Organization, job position
• Ryazan State Agrotechnological University named after P.A. Kostychev
доцент
Research interests
Повышение эффективности использования мобильной сельскохозяйственной техники, совершенствование её системы диагностирования.
Web site url
—
Current rating (overall rating of articles)
0
TOP5 co-authors
Articles count: 28
Сформировать список работ, опубликованных в Научном журнале КубГАУ
-
Description
In agriculture the issue of enhancing the efficiency of operation of internal combustion engines (ICE), reducing the costs of maintenance (TO) and repairing (TP) fuel supply apparatus (TA) using the improvement of methods and means of diagnosis is a topical in connection with the aging rolling stock farming and lack of investment. Analysis of the known TA diesel engine vehicles systems showed that the most widespread system is the divided type with multiplunger high pressure fuel pump (fuel pump), while the methods of its diagnosing are laborious, they require partial disassembly and have insufficient accuracy. The mathematical models that characterize the work of a high-pressure fuel pump (fuel pump) use a large number of parameters that significantly affect the quality of dynamics of the change of pressure values of diesel fuel. However, in the materials of previously published articles there were no issues considered assessing the extent of the quantitative impact, performance and features change in the sensitivity settings of the mathematical models on the simulation results, there are no recommendations on the degree of sensitivity and importance of each of the parameters. For a more accurate diagnosis of the fuel supply apparatus of a diesel engine it is advisable to use several methods of diagnosing. The article substantiates development of a mathematical model of a high-pressure fuel pump based on the analysis of modern methods of diagnosing of fuel equipment for autotractor diesel engines
-
ANALYSIS OF METHODS AND MEANS OF DIAGNOSTICS OF BRAKE SYSTEMS OF VEHICLES
Description
The article presents native and foreign bench-top and board methods to test the automobile break systems. One can find information about some native trailer-break stands. We have analyzed their advantages and drawbacks such as low information capacity, high diagnostics processing time, low quality of regulation and maintenance operations due to big influence of the operator’s experience, his knowledge and individual characteristics, and great instability of manual test modes on the results of the investigations. To remove these shortcomings they have had some experiments at MADI in order to develop the module to the brake qualities stand. When using it one can have automatic diagnoses and flow chart is presented in the article. Due to the existing vehicles’ state inspection mode and diagnostic means in our country there appeared new stands for brakes control. One can attribute to these devices a range of brake qualities stands developed and produced at Novgorod plant GARO. These are STS-3, STS-10 and STO series stands for cars, trucks, buses and micro-buses. The article also presents some foreign stands used in Russia such as universal brake stands STM by META firm, the break stand IW7 Eurosystem by MAHARUSSIA firm. We have presented in the article the results of the analysis of simple and complicated board means of diagnosis as “Eftor-2”, “Effect”
-
Description
The development of agricultural production inevitably entails an increasing volume of traffic and a turnover of goods. Therefore, the issues of increasing transport efficiency, reducing the price of transportations and improving productivity acquire great importance. In most cases, supersize dump trucks used for the transport of agricultural production have much more than 6 tons axle load. Thus, these cars need to have roads with improved surface to each field, which undoubtedly is a significant drawback. Because of the extra movements of harvester dump trucks on the turning strip at the end of the field, it increases expenses of damage and loss of crops and the arrival of heavy machinery in the field leading to soil compaction, that in the end affects the future crop. Transportation of agricultural commodities is most effective when the car arrives directly to the harvester machinery. Such vehicles must have sufficient abilities and capacity of the body comparable with the volume of a combine hopper and has no significant impact on soil sealing. With this method, harvesters do not make extra movements and are not idle. Basic requirements for vehicles used in the harvesting potatoes, are in a more productive use due to increasing the capacity and reducing downtime when loading or unloading and minimizing the level of damage to other tubers. For the transportation of agricultural products there is a different transport technology, which either do not fully meets the requirements of transportation of highly fragile product, or has a significant cost. Therefore, we require a specially equipped vehicle bodies, with a competitive ability in the range acceptable to the Russian Federation. As one of the innovative developments, this article proposes a tipper body of the vehicle for transportation of highly fragile agricultural products. The proposed design solution for the tipper ensures a uniform unloading of transported products from the vehicle body and prevents arching issues
-
Description
This article deals with the rules of observance of agriculture technology requirements for the production of potatoes in particular. On the example of the combine PDA 1.2, we have considered the places having the greatest damaging effect on roots. One can also find a summary procedure for calculating the probability of defective products
-
Description
The article examines the issues of increasing the efficiency of the system of technical operation of mobile agricultural machinery by means of monitoring the state of units and aggregates of the latter through diagnostics. The problems of complex diagnostics of diesel fuel equipment are investigated. The urgency of diagnosing a fuel injection pump without dismantling from the engine is shown from technical, economic and environmental points of view. The effect of operational malfunctions of some devices of fuel equipment on parameters of its operation as a whole is analyzed. On the basis of the analysis of diagnostic devices application, their grouping is suggested. The parameters to be studied in connection with peculiarities to decide whether it is possible to estimate the technical state of the fuel injection pump without dismantling from the internal combustion engine are indicated. Based on peculiarities of the fuel injection pump technical state estimation, a research program is developed and the results of the research are presented. Specific features of testing the fuel injection pump are indicated. Analysis of the results of the research shows that a smaller error in the change of the cyclic fuel feed rates supplied by the fuel injection sections takes place at the engine speed corresponding to the indicated power. The conclusion is made that the presented research results can be used as a basis for developing a technique (technology) for diagnosing the fuel injection pump without dismantling from the internal combustion engine
-
Description
The article presents a technical diagnostics of a car as a complex of goals and tasks connected with trouble-shooting of mechanisms and systems in order to eliminate them. We have considered the stages of computer diagnostics of different automobile systems such as diagnosing the engine, the brake system, steering and suspension. We have analyzed their components, the ways of troubleshooting and elimination recommendations. The article presents the main troubles transferred from the electronic control unit. The article also presents the stages of diagnosing the engine including external examination, listening to abnormal noises, checking the operating fluids and the engine management system, diagnosing the basic engine systems and checking the cylinders being filled. The article contains the list of main troubles and their reasons. One can also see diagnosing the brake system, its defects and remedies. The article presents diagnostics and repair of the suspender and graphics describing the check of the dismantled shock strut at the stand and tests of the shock strut without being dismantled. We have analyzed computer diagnostics and the problems it solves
-
DIAGNOSTICS OF THE MOBILE AGRICULTURAL TECHNIQUES USING THE DEVICE OF THE «SAMTEC» COMPANY
Description
The issue of the article is the procedure of diagnostics of the mobile agricultural techniques based on the implementation of the automatic control electronic systems. In particular, a ternary circuit is being created for the analysis of diagnostic protocols, which allows facilitating the specifying of the protocols, including compiling of documents describing the basic parameters, the structure and the constants of diagnostic protocols
-
Description
Based on the previous investigations we have underlined the need to increase fruit and vegetables preservation quality while transporting them from the producer to the consumer at the expense of improving the road transport operation for its intended purpose. We have made a conclusion about the need to develop strategies for maintenance and repair as for the actual technical state at the expense of developing the diagnosis system based on the development of a math model of changing the technical state of the diagnosis object, developing a method of rational set of objects to be diagnosed and determining the technical state optimal control frequency. We have confirmed that the above mentioned is possible when considering the system of technical operation of road transport as an organization-production system and applying the engineering-cybernetic approach to improve this system. We have considered the basic requirements for the efficiency indexes when investigating and improving the operation system that will allow achieving the aim we have had and can be described mathematically. We have made a conclusion about the urgency of the issue we studied and the possibility to develop the efficient operation system of road transport based on the provided criteria
-
MATH DESCRIPTION OF THE PROCESS OF THE AUTOMOBILE DIAGNOSING PARAMETER CHANGE
Description
The article shows the importance of math description and grounding the function taking into account the process of changing the parameter when developing the methodology of automobile diagnosing. It is pointed out that after all the prediction error and effort depend on the choice of approximating function. The wrong choice of the function can bring to naught all the efforts to manage safety margin and other parameters of cars elements. One can find the requirements to math description and grounding the function of the parameter change. Based on the analysis of factors influencing the process of parameters change and requirements to math description of this process we have noticed that it is necessary to approximate the change (increase) of the state variable by the chance ordered function with increasing realizations. One can consider the parameter change realization both strictly and not as a monotone function ranging from zero to the limit change of the parameter. We have mentioned that the fore-quoted reasoning with the account of two groups of factors make possible to investigate the parameter change at this or that moment of work as a sum of two random values. We have made a conclusion that they usually express the link between the change rate (for instance, detail wear rate) and the readings of the material properties and functioning conditions (metal skin hardness, unit loading on the detail surface, its relative rate of movement) by the functional determined dependence got as a result of lab tests or theoretical study. In the conclusion, one can see that the analysis of the results of math description of the process of the parameter change is sufficient enough
-
METHODS OF CHOOSING DIAGNOSED VEHICLE PARAMETERS IN AGRICULTURE
Description
The article presents an analysis of the existing approach to automobiles technical maintenance in agriculture. We have pointed out that in modern conditions it is impossible to forecast the automobiles maintenance operation frequency and as a result its improvement as well. It is obvious that one cannot achieve the considerable increase of maintenance operation efficiency by separate means and there exist the necessity to treat it as a system and use the up-to-date methods to investigate and improve complicated systems. We have made a conclusion that the increase of maintenance operation efficiency is not possible without some rational strategy of maintenance operation and repair. We have shown that the program of maintenance operation and repair being an integral part of automobiles technical maintenance has considerable effect on maintenance and repair quality. As a result, there is some necessity of the developed system of parameters diagnosing and control in technical maintenance and repair. We have shown that to get sufficient diagnose information one needs selection of the controlled parameters which give maximum information about the object technical status taking into account possible characteristics of its operational faults. We have discovered that in order to solve the task it is necessary to have the object’s information pattern, calculation of possible characteristics of the controlled object being in good or bad order due to some parts fault, evaluation of information brought by every parameter and determining parameters to be diagnosed. We have proposed to evaluate the parameters’ information value with the help of information entropy as uncertainty measure that is one of the main concepts of the information theory. Because of solving the task, we have got the aggregate of the controlled automobile parameters orderable according to the amount of information
pdf 290.580kb
doc 290.580kb