name
Shepelev Anatoliy Borisovich
Scholastic degree
•
Academic rank
associated professor
Honorary rank
—
Organization, job position
• Kuban State Agrarian University
доцент кафедры тракторов, автомобилей и технической механики
Research interests
технический сервис машин, проектирование, парк технических средств
Web site url
—
Current rating (overall rating of articles)
0
TOP5 co-authors
Articles count: 3
Сформировать список работ, опубликованных в Научном журнале КубГАУ
-
Description
With the aim of improving the productivity and performance of the sunflower seed separation process in the air-sieve seed-cleaning machine called MVU-1500 its multivariate analysis was carried out. The main indicators of the seed heap separation process were determined according to the feeding of the seed heap onto the sieve of the lattice. The indicators are as follows: completeness of the j-th components screening, the j-th components content in the sieve path, the completeness of their discharge and their content in the discharge from the sieve tier. Having adopted the hypothesis of a possible increase in the efficiency of the separation process in the air-sieve grain cleaning machine, we analyzed the delivery patterns of seed heap components into the pneumatic channel with the aim of optimizing the process. For a more complete assessment of the process indicators under consideration, basic patterns of movement of various components in the sieve-tier lattice were estimated. It was taken into account that in modern designs of air-sieve grain cleaning machines seeds are fed into the pneumatic channel from the sieves. When the width of the lattice is equal to one, the density of the j-th component of the seed heap is constant along the length of each sieve in the stack of sieves and the separation coefficient is constant along the length of the sieve, the expression received estimates the average speed of movement in the first sieve-tier lattice in the steady process of separation. There was evaluated the statistical significance of differences of the j-th component average speed movement on the second sieve- lattice by Student's t-criterion, which showed that they belong to the same sample of random variables and do not have statistically significant differences. Therefore, we can obtain the following velocity values of the heap of sunflower seed movement in the sieve-tier lattice: fragments of stems velocity is 0.0518 m/s; milled seeds velocity is 0.0381 m/s; velocity of sunflower seeds less than 3.2 and 3.2-3.6 mm thick is 0.0835 m/s, velocity of sunflower seeds of 3.6-4.0 mm thick is 0.0453 m/s, that of more than 4.0 mm thick is 0.0410 m/s
-
PRODUCTION PROSPECTS FOR PROTEIN FEEDS MADE FROM SUNFLOWER SEEDS IN SMALL FARMING ENTERPRISES
05.20.00 Processes and machines of agroengineering systems
Description
The quality of feed is one of the main factors determining the development of industries necessary for the country. In this regard, extrusion technologies for processing raw materials of plant origin are of great interest. The prospect of processing plant raw materials using thermoplastic extrusion is due to two main reasons: first, the large volume and variety of products produced using this technology, and, secondly, the economic effect that gives the production of extrusion products by expanding the consumer properties of the feed produced. Extrusion equipment not only expands the range of feed, but also increases the employment of the rural population during the off-season. Therefore, the purpose of the study is to assess the prospects for the introduction of protein feed production by extruders from sunflower seeds in small agricultural enterprises. The study used an analytical review and analysis of published and patent information on technical means – extruders used for the production of protein feed from oilseeds, such as sunflower. The analysis of literature sources on the work of the existing forage preparation equipment showed that serial machines are metal-consuming, energy-consuming, used with low efficiency, due to technical and technological shortcomings. The analytical review of patent sources of extruders for preparation of compound feeds for the purpose of identification of the direction of their development and elimination of shortcomings of the existing is given. Modernization of extruders for the preparation of feed in the patent information goes in different ways, depending on the goal, which will improve their productivity and quality of protein feed. Serial production of technical equipment for the preparation of protein feed allows you to compete with foreign technology. Therefore, the development and improvement of serial domestic equipment for the preparation of protein feed from sunflower seeds for functional purposes are competitive and significantly cheaper and can reduce energy costs for their extrusion, which is an urgent task
-
IMPROVING THE CLEANING PROCESS OF SEEDS MATERIAL ON AIR-SIEVE GRAIN CLEANING MACHINES
Description
The article presents the theoretical and experimental research of the guide wire, made of polytetrafluorethylene, for sieve system of air grain cleaning machines. We have calculated trajectory of movements of the components of piles of sunflower seeds in the vertical pneumatic channel when they are vanishing from the surface of the guide wire at its various parameters. Specifying the location of a guide wire polytetrafluorethylene in air-sieve grain cleaning machine was carried out in an experimental setup. The guide wire of polytetrafluorethylene was installed in three locations: 1) at a distance of 20 mm to the pneumatic channel; 2) on the levels with the pneumatic channel; 3) at a distance of 20 mm inside pneumatic channel. The approach of the guide wire into the inside of the pneumatic channel in the experimental setup the quality of sunflower seeds increased with 97.61 to of 99.08 %. The content of organic impurities, milled and broken seeds in the pile decreased respectively from 1.83 to 0.21 %, to 1.29 0.66 % 0.51% to 0.25% in the manufacture of wire made of polytetrafluorethylene. To increase the purity of the seeds of the main culture we use a photoelectron separator, and the received seeds for animal feed were in the form of sunflower cake produced on screw presses. As a result of carried out experimental and theoretical researches it is established, that the guide wire shall be made of polytetrafluorethylene and are placed inside the pneumatic channel at a distance of 20 mm and an angle of 40°, which allows to improve the quality of the seeds material and increase the speed of their input to pneumatic channel air-sieve grain cleaning machines type MVU-1500
pdf 389.904kb
doc 389.904kb