Don State Technical University
Author list of organization
List of articles written by the authors of the organization
-
EXPERIMENTAL STUDY OF NOISE AND VIBRATION OF THE BAND SAW FRAME SAWS AND WOODWORKING MACHINES
DescriptionThe article presents the results of experimental studies of band noise generation and multirip woodworking machines. The studies have shown that saw woodworking group, as well as metal, are general patterns in the formation of the spectral composition that allows to approach the development of practical recommendations to reduce sound pressure levels in the work area to the operators of sanitary norms. Of particular note is the fact that elevated levels of noise generated by the cutting tool. The effect of changes in process parameters, in particular, the depth of cut and feed to levels of noise generated by the tool. For example, increasing the depth of cut in half leads to an increase of sound pressure levels at 5.8 dB (theoretically obtained value is 6 dB), and supplying a halving of the sound pressure levels reduces by 5 dB. High enough for engineering purposes convergence of theoretical and experimental sound pressure levels and the fact that the calculated values above experimental, allows the calculation and design of the system to reduce the noise under consideration in the machine is, only in service but also in their design
-
EXPERIMENTAL RESEARCHES OF NOISE AND VIBRATION IN BAND-SAW MACHINE TOOLS
DescriptionIn the article, the process of noise formation in a band-saw machine tool is described and the way of clearing of noise and vibration which productivity is confirmed with the experiments is offered
-
05.20.01 Technologies and means of mechanization of agriculture (technical sciences)
DescriptionAn effective factor in increasing the yield of grain crops has long been considered to provide the sown seeds with the necessary nutrition area when sowing. ideally, the plant's nutrition area should be in the form of a circle with an area of 10 ...25 cm2 without overlapping with the neighboring ones. This distribution of feeding areas means an ideal spread of crops without borders and row spacing. However, in the grain production, the standard crop with a row spacing of 15 cm was spread out, where the seed distribution is artificially limited to a narrow strip where the grain feeding areas overlap. According to experts, this placement of seeds, which has developed historically, is not justified by either the experience of agricultural production or agricultural science. The availability of seeds with the necessary feeding area for row sowing is small – about 15%. At the present time, agricultural science is showing increasing interest in the technologies of ideal spread seeding. But the ideal is not yet obtained due to the lack of appropriate coulters. In these conditions, the band seeding method that closely implements the ideal multiple seeding comes to the fore. We propose a number of designs for single-disc and single-disc coulters for strip sowing, which form a fairly wide furrow up to 100 mm
-
EFFICIENCY OF THE HARVESTERS TECHNICAL STATE MANAGEMENT WITH THE USE OF EXPERT SYSTEMS
DescriptionManagement of the technical state of machines considered in three aspects: intellectual, information and physical. The need to reduce the load on the operator in the intellectual and information aspects. A description of the expert system for diagnosis of combine harvesters. Presented data of experimental researches of efficiency of expert systems for the management of the technical state of the harvesters "Don"