name
Kokorev Gennady Dmitrievich
Scholastic degree
•
Academic rank
associated professor
Honorary rank
—
Organization, job position
• Ryazan State Agrotechnological University named after P.A. Kostychev
доцент
Research interests
Повышение эффективности использования мобильной сельскохозяйственной техники, совершенствование её системы диагностирования.
Web site url
—
Current rating (overall rating of articles)
0
TOP5 co-authors
Articles count: 28
Сформировать список работ, опубликованных в Научном журнале КубГАУ
-
RECYCLING OF TIRES AND THEIR ELEMENTS
DescriptionIn the world, recycling processes have recently become more common in order to save material and energy resources. Currently, in connection with the level of motorization, there grew a problem of recycling waste tires and their elements which is of great importance for many regions of the country. Decommissioning worn tires is a source of environmental pollution, bearing the prolonged character; they are not a subject to biological destruction and require constant increase of storage facilities. There is a continuous accumulation of used tires and we can recycle only about 20% of their amount. Worn tires represent very large-capacity products of polymer-containing waste, virtually resistant to natural degradation. Therefore, the problem of processing and secondary use, emerged from the operation of tires is of great economic and environmental significance. However, the worn tires are a source of valuable secondary raw materials: rubber, soot (essentially pure carbon), metal and synthetic cord. 90% of all waste of rubber are tires and represent a vast reserve of raw materials. In the emerging in the industry nonrenew- material resources the efficient use of secondary raw materials is of great importance. There are improved technologies for processing rubber goods, and the equipment used for it
-
Description
The article analyzes the results of the evaluation of the filter element of the filter of thin clearing of fuel on the basis of the change in pressure in the common rail fuel supply system depending on mileage
-
Description
The role of transport in agricultural production is significant. It is the connecting link in the technological chain of the agro-industrial complex (of the APC). On-farm transport in the APC together with cars and tractor transport are widely used. The rationality of the use of wheeled tractors for farm transport substantiates the possibility of their movement on asphalt and on dirt roads. The specific gravity of the tractor transport in the domestic agriculture is 22-27% of the total volume of transport and 50-60% of the volume of farm traffic. A high level of use of tractor transport has been observed in the countries of Western Europe and the USA. In the farms of leading countries of Western Europe (Germany, Italy, France, etc.) about 70- 90% on-farm transport of agricultural goods is done by tractor transport. Tractor transport in a live environment is running on roads with varying terrain, a wavy profile cover, on soils with different hardness and humidity. When driving vehicles at high speeds, the trailer is wobbling from side to side, constantly accompanying tractor transport during its operation. As a result, it is bad for propulsion, transmission, and it deteriorates the dynamic performance properties of equipment, working conditions of the operator. To reduce the amplitude of oscillations of the trailer, the operator is forced to work strenuously with the steering wheel or to slow down the speed, which in turn affects operator fatigue, as well as the performance and maneuverability of the vehicle. Thus, advanced technologies in electronics, sensor technology and software will determine the nature of agro-technical innovations and will lead to increased automation of business processes in crop production with the aim to organize the work more effectively, efficiently, accurately, environmentally friendly and economically feasible. When working with intelligent technologies, understanding the development of high-tech, precision engineering requires a revision to the personnel policy and education in agriculture, which should be based on the relevant organization of farms and their proper new type engineering solutions
-
Description
The transportation process plays an important role in the delivery of agricultural products to the consumer. On how well the fruits are preserved, their grade will depend, and, consequently, the price of them. It is known, that the annual damage from losses of agricultural products in the agro-industrial complex amounts to 8 billion rubles, according to various estimates. A large number of different factors affect the safety of fruits during transportation: temperature, humidity, smoothness of the vehicle, type of container, etc. The more factors will have a negative impact on fruit and vegetable products, the more losses will ultimately be. The appearance of dents and abrasions on the fruits gives rise to the formation of foci of rot, leading to damage to the transported products, and, as a consequence, reducing the grade. In order to reduce the losses of fruit and vegetable products in the process of transportation, the USSR and the Russian Federation have been and are working on the creation of containers and ways of transporting pomegranates. All of them, according to the authors, are able to reduce the dynamic loads that arise during the transportation process and have a negative impact on the transported products. However, due to various circumstances in commercial gardening all these developments have not been extended
-
NEW TECHNICAL SOLUTIONS FOR A SEPARATION OF THE ORGANS OF POTATO MACHINERY
DescriptionOne of the promising directions of development of agriculture of the Russian Federation is to increase the production, improve the quality and decrease the cost of potato cultivation. Annual cleaning is one of the most intense and costly in transport and technological processes. Potatoes - blending high culture and very picky about cleaning. The highest yields and income from potato production get where embedded technology to optimize energy and labor costs. The main (though not only) the special technical means used during machine harvesting potatoes, are potato harvesters. The main problem when cleaning is a problem of balancing conflicting requirements to the process and possibilities of agricultural machinery. Including increasing the purity of the tubers in the container with one hand, minimization of losses and damages of tubers on the other hand, when the performance of equipment. In this article we propose a circuit-design solution separating the working body of the potato harvester that allow for cleaning to significantly reduce the amount of traumatized potatoes in the process of separating soil and vegetable impurities, creating the preconditions for the elimination of damage to the tubers on the hard side of the working bodies of harvesting machines. Informed choice and timely use of plug-in modules (separating working bodies) in modern potato harvesting machines at work in specific climatic conditions allows them to fully match the list of regulated agronomic requirements. Thus, the creation of new science-based technical solutions for a separation of the organs of potato harvesters is an actual scientific-technical task, which makes a significant contribution to the development of the country
-
SOME ASPECTS OF REDUCING FRUIT DAMAGE DURING HARVESTING AND TRANSPORT OPERATIONS
DescriptionFruit harvesting is the final and decisive operation in the general work plan for growing fruit, which largely determines the qualitative and quantitative indicators of production and economy of industry in general. Increasing productivity by improving the safety of fruits and vegetables is a priority and not an easy task. For example, the use of cleaning technologies with the use of machinery for harvesting of apples by shaking can significantly reduce the time of gathering fruit compared to hand harvesting. This technology may be applicable, if the fruit is grown for the manufacture of juices, jams, etc. Currently, in several European countries and in the USA, they widely use fruit harvesting platforms and machines. The leader in the production of fruit harvesting platforms is Italy. To reduce the damage to fruit in agriculture, the analysis of the traumatic factors is of great importance, with the analysis of available machines and their subsequent modernization with the aim of improving the reliability and quality of harvesting and transport process, taking into account of the algorithm for solving these problems, the creation of new varieties of fruits and vegetables suitable for machine processing, strict compliance with deadlines and agronomic requirements for the performed technological operations, taking into account the savings of energy and resources when using mobile technology. In addition to the modernization of the machines for efficient operation, it is necessary to improve also the scheme of planting of gardens and methods of cultivation, transfer horticulture to intensive way of development
-
METHODS OF EFFICIENT MONITORING RATE OF THE MOBILE AGRICULTURAL EQUIPMENT BRAKE SYSTEM
DescriptionThe article presents the methods of efficient monitoring rate of the mobile agricultural equipment brake system based on the usage of methods of the theory of relativity. We have considered the methods of the brake gear monitoring rate according to the acceptable level of reliability, to the technical index and change logic of the technical parameters state and economic-probabilistic method. From the above-stated one can see, first, that diagnosing usage is the development of maintenance preventive strategy. Second, its practicability and the ways of realization are determined by technical and economic calculations
-
A METHOD OF CONSTRUCTING A MATRIX OF STATES OF THE DIAGNOSTIC PARAMETERS OF BRAKE SYSTEM OF A CAR
DescriptionThe article describes the method of determining the list of rational diagnostic parameters of the brake system of a vehicle using the theory of probability and mathematical statistics. The problems determining the statistical probabilities of failures on objects considered a run; mathematical models (regression dependence) the probability of failure of run; A statistical evaluation of the significance of the coefficients of regression models; verification has been made on the adequacy of the regression models; the probabilities of possible states of objects. On the basis of the construction and analysis of structural- effect model brake system information and calculates the importance of each monitored parameter using the notion of information entropy, determine the parameters to be diagnostic, and builds a matrix condition of brake systems for non-destructive testing, in order to move on maintenance and repair of the actual state
-
METHODS OF CHOOSING DIAGNOSED VEHICLE PARAMETERS IN AGRICULTURE
DescriptionThe article presents an analysis of the existing approach to automobiles technical maintenance in agriculture. We have pointed out that in modern conditions it is impossible to forecast the automobiles maintenance operation frequency and as a result its improvement as well. It is obvious that one cannot achieve the considerable increase of maintenance operation efficiency by separate means and there exist the necessity to treat it as a system and use the up-to-date methods to investigate and improve complicated systems. We have made a conclusion that the increase of maintenance operation efficiency is not possible without some rational strategy of maintenance operation and repair. We have shown that the program of maintenance operation and repair being an integral part of automobiles technical maintenance has considerable effect on maintenance and repair quality. As a result, there is some necessity of the developed system of parameters diagnosing and control in technical maintenance and repair. We have shown that to get sufficient diagnose information one needs selection of the controlled parameters which give maximum information about the object technical status taking into account possible characteristics of its operational faults. We have discovered that in order to solve the task it is necessary to have the object’s information pattern, calculation of possible characteristics of the controlled object being in good or bad order due to some parts fault, evaluation of information brought by every parameter and determining parameters to be diagnosed. We have proposed to evaluate the parameters’ information value with the help of information entropy as uncertainty measure that is one of the main concepts of the information theory. Because of solving the task, we have got the aggregate of the controlled automobile parameters orderable according to the amount of information
-
MATH DESCRIPTION OF THE PROCESS OF THE AUTOMOBILE DIAGNOSING PARAMETER CHANGE
DescriptionThe article shows the importance of math description and grounding the function taking into account the process of changing the parameter when developing the methodology of automobile diagnosing. It is pointed out that after all the prediction error and effort depend on the choice of approximating function. The wrong choice of the function can bring to naught all the efforts to manage safety margin and other parameters of cars elements. One can find the requirements to math description and grounding the function of the parameter change. Based on the analysis of factors influencing the process of parameters change and requirements to math description of this process we have noticed that it is necessary to approximate the change (increase) of the state variable by the chance ordered function with increasing realizations. One can consider the parameter change realization both strictly and not as a monotone function ranging from zero to the limit change of the parameter. We have mentioned that the fore-quoted reasoning with the account of two groups of factors make possible to investigate the parameter change at this or that moment of work as a sum of two random values. We have made a conclusion that they usually express the link between the change rate (for instance, detail wear rate) and the readings of the material properties and functioning conditions (metal skin hardness, unit loading on the detail surface, its relative rate of movement) by the functional determined dependence got as a result of lab tests or theoretical study. In the conclusion, one can see that the analysis of the results of math description of the process of the parameter change is sufficient enough