№ 126(2), February, 2017
Public date: 28.02.2017
Archive of journal: Articles count 63, 153 kb
-
THE FINISHING CLEANUP AND STRENGTHENING PROCESSING OF AGRICULTURAL PURPOSE CARS DETAILS
DescriptionResults of engineering and scientific search of improvement of resource-saving machine technologies of finishing and cleanup processing of cars details, development of new camps and technologies are presented. The possibility of low-frequency fluctuations with big amplitude can be implemented due to assembling flat or curvilinear elements on external surfaces of the relative screw reel. The use of computer modeling enabled us to obtain a relative screw drum that provides not only giving movement to loading masses with a big fluctuations amplitude, but also compression of loading masses in the process of their motion from loading to unloading. In such machines increase in processing efficiency is reached not only due to achievement of great movement amplitudes values of the loading masses, but also at the cost of compression of loading masses in processing and intensity increase of their mixing. The scheme of the machine for continuous processing with mechanization of separation of details from working environments particles is provided. Results of researches of quality and surfaces micro hardness change processed in the offered machines designs show that details processing time makes 3-6 min
-
CURRENT STATE OF MECHANIZATION OF TOBACCO HARVESTING
DescriptionThe article presents results of studies of the present state of mechanization of tobacco harvesting. The aim of the research was to assess the state of the technical equipment of the tobacco farms in the current economic conditions. We have performed an analysis of the technologies of harvesting tobacco. Main problems of harvesting tobacco leaves were shown. We have analyzed the main constructive scheme of tobacco harvesters used for different technologies of harvesting tobacco leaves. The article gives main advantages and disadvantages of the applied technical solutions and lists tobacco harvesters used in foreign tobacco farms. A disadvantage was the impossibility of adaptation to the domestic types of tobacco. In the end, we have developed a project for solving scientific and technical problems of complex mechanization of technological processes of preparation of plantations to drying process, carrying out machine harvesting and preparing tobacco leaves harvested by the machine. This involves three stages. This will solve the problem of insufficient technical equipment of production of raw tobacco
-
PREPARATION AND APPLICATION OF LIGHT WATER IN FOOD TECHNOLOGY
DescriptionWater is the most important substance of the composition of all living organisms on our planet. Active industrialization of society has led to an increase in the amount of water consumed for the needs of the economy and to increase the volume of poorly treated sewage. In the twentieth century, during the arms race, the United States, the USSR, Britain, France, China, in the tests of nuclear weapons, the deuterium content in groundwater and surface waters has increased significantly. Formed in nuclear fission neutrons loose, falling into the nucleus of a hydrogen atom form a deuterium atom. In the last 70 years, the deuterium content of water bodies has increased by almost 30%. Natural ponds and rivers no longer cope with self-purification of polluted water. In most regions of the country there are restrictions on the use of natural sources of water for drinking and bathing. Only the rare mountain springs and meltwater mountain tops glaciers have pristine purity of water with a low content of deuterium. There is reliable information about the harmful effects of heavy water on biological objects and the possibility of reducing the deuterium content in tap water by technical means. A method of producing so-called "protium" steam distillation of water proven in practice is based on the famous kinetic isotope effect difference of light water boiling temperature (100 С) and heavy water (103 С), but this method is characterized by higher energy costs. It is not economically justified. Another method of forming the light water is electrolysis, which in spite of the considerable power consumption has prospects of implementation. Our job is to create a viable water separation technology with a different isotopic composition. The resulting improved technology for water with DDW will be widely used in the production of beverages and a variety of other foods
-
DESING OF AUTOMATED SYSTEMS IN SECURED EXECUTION OF MILITARY USE
DescriptionIn the work we have developed a structural modeling of the optimal choice of information security devices in the design of automated systems in the protected execution in the transition to network centric methods of control of troops and weapons
-
Description
Long-term storage of fruits can be achieved by means of their special preparation by pre-treatment before storage by electromagnetic fields of extremely low frequency (ELF EMF). In the current study patterns of influence of ELF EMF pre-treatment of fruits on the effectiveness of reducing microbial contamination during storage for the development of effective technological modes of preparation of fruits before storage are revealed. Qualitative and quantitative characteristics of microbial contamination of the fruits’ surface were studied. Effective modes of fruits (apples and pears) treatment by ELF EMF were established - for apples: frequency - 22 Hz, current - 10 A for 40 minutes, and for pears: frequency - 26 Hz, current - 5 A for 50 minutes, allowing to reduce to the maximum extent the microbial contamination of their surface, and also to reduce the loss of their weight from microbial spoilage during storage. The terms of storage of processed by ELF EMF fruits under refrigeration were established - for apple varieties Idared and Golden Delicious - within 8 months, for pear variety Conference - for 7 months
-
INTENSIFICATION OF CULTIVATION OF CHLORELLA WITH THE USE OF IRON NANOPARTICLES
DescriptionThe influence of reduced iron nanoparticles and its oxide Fe2O3 on the growth rate of Chlorella vulgaris IFR # S-111 added to the Tamiya nutrient medium is studied. In the range of concentration of additives 0-0,1 g/l (gram per litre) an oxide inhibited the growth of microalga already when its content in the environment 6,25*10-3 g/l. With the increase of reduced iron concentration in the first twenty-four hours in the whole range the growth of the cell concentration of microalga was observed. With a maximum iron concentration of 0,1 g/l the density of a chlorella exceeded the control for 70%, and in 48 hours for 150%. The microscopy hasn't shown morphological changes of a chlorella cells with addition of the nanoparticles to nutrient medium. Accelerated reproduction of the microalga cells became the result of the intensification of the photosynthetic processes, as indicated by the nature of the parameters of delayed fluorescence (DF) of chlorophyll and shapes of the induction curves. The maximum level of DF in all experimental samples after 24 hours of cultivation was significantly higher than the control, and photosynthetic activity increased with increasing concentration of nanoparticles. In 48 hours the maximum activity was observed at concentration of nano iron 0,0125 mg/l, then decreased. It shows that with an intensive growth of a chlorella the potential of nutrient medium was quicker exhausted that led to decrease in intensity of photosynthetic processes
-
Description
In the article we present the results of comparative researches of herbaceous covering of plant communities in the alpine zone of the Republic of Dagestan on the example of Dido- depression. The plant covering of the investigated region differs in extraordinary variety. The general regularity of plant distribution is vertical zones. There were made 6 ground profiles at different elevations from 1450m to the alpine zone at 2500m above sea level. Variety of phytocenoses is connected as with changes of ground conditions, so with environmental conditions. We have researched and identified the types of grounds with laying of grounds profiles on the vertical zonality. There we studied the specific composition of herbaceous plants on the examined ground and given names to plant communities. The studying phytocenosis are analyzed by productivity of functional groups. We have shown the share of each species and their abundance. Of all plant communities, the mass of herb differ dominates. The composition of plant communities is analyzed, depending on high-altitude grades and degree of anthropogenic load influence
-
Description
Theoretically and experimentally, we investigated the process of adjusting the pH of natural water of hydrocarbonate class electrodialyzer with bipolar membranes with channel length of 40 cm. We experimentally measured concentration of components, pH of the solutions in alkaline and acid channels of electrodeposition depending on the current density. The article describes a mathematical model for long channels; to scale the mass transfer characteristics of the process there was applied and verified a method of compartmentalization, which gave the possibility to calculate the dependence of the component along the channel length at different velocities of flow of the solution. Numerical calculations were compared with experimental data on electrodialyser of 10 cm and 40 cm length
-
01.00.00 Physical-mathematical sciences
01.00.00 Physical-mathematical sciences
DescriptionClassic quantitative measure of the reliability of the models: F-measure by van Rijsbergen is based on counting the total number of correctly and incorrectly classified and not classified objects in the training sample. In multiclass classification systems, the facility can simultaneously apply to multiple classes. Accordingly, when the synthesis of the model description is used for formation of generalized images of many of the classes it belongs to. When using the model for classification, it is determined by the degree of similarity or divergence of the object with all classes, and a true-positive decision may be the membership of the object to several classes. The result of this classification may be that the object is not just rightly or wrongly relates or does not relate to different classes, both in the classical F-measure, but rightly or wrongly relates or does not relate to them in varying degrees. However, the classic F-measure does not count the fact that the object may in fact simultaneously belongs to multiple classes (multicrossover) and the fact that the classification result can be obtained with a different degree of similarity-differences of object classes (blurring). In the numerical example, the author states that with true-positive and true-negative decisions, the module similarities-differences of the object classes are much higher than for false-positive and false-negative decisions. It would therefore be rational to the extent that the reliability of the model to take into account not just the fact of true or false positive or negative decisions, but also to take into account the degree of confidence of the classifier in these decisions. In classifying big data we have revealed a large number of false-positive decisions with a low level of similarity, which, however, in total, contribute to reducing the reliability of the model. To overcome this problem, we propose a L2-measure, in which instead of the sum of levels of similarity we use the average similarity by different classifications. Thus, this work offers measures of the reliability of the models, called L1-measure and the L2 measure, mitigating and overcoming the shortcomings of the F-measures; these measures are described mathematically and their application is demonstrated on a simple numerical example. In the intellectual system called "Eidos", which is a software toolkit for the automated system-cognitive analysis (ASC-analysis), we have implemented all these measures of the reliability of the models: F, L1 and L2
-
01.00.00 Physical-mathematical sciences
DescriptionIn 1893, the French mathematician J. Adamar raised the question: given a matrix of fixed order with coefficients not exceeding modulo this value, then what is the maximum modulo value can take the determinant of this matrix? Adamar fully decided this question in the case when the coefficients of the matrix are complex numbers and put forward the corresponding hypothesis in the case when the matrix coefficients are real numbers modulo equal to one. Such matrices satisfying the Hadamard conjecture were called Hadamard matrices, their order is four and it is unknown whether this condition is sufficient for their existence. The article examines a natural generalization of the Hadamard matrices over the field of real numbers, they are there for any order. This paper proposes an algorithm for the construction of generalized Hadamard matrices, and it is illustrated by numerical examples. Also introduces the concept of constants for the natural numbers are computed values of this constant for some natural numbers and shown some applications of Hadamard constants for estimates on the top and bottom of the module of the determinant of this order with arbitrary real coefficients, and these estimates are in some cases better than the known estimates of Hadamard. The results of the article are associated with the results of the con on the value of determinants of matrices with real coefficients, not exceeding modulo units