05.00.00 Technical science
-
OPTIMIZATION OF PARAMETERS OF ELEMENTS COMPUTER SYSTEM
DescriptionThe work is devoted to the topical issue of increasing the productivity of computers. It has an experimental character. Therefore, the description of a number of the carried-out tests and the analysis of their results is offered. Previously basic characteristics of modules of the computer for the regular mode of functioning are provided in the article. Further the technique of regulating their parameters in the course of experiment is described. Thus the special attention is paid to observing the necessary thermal mode in order to avoid an undesirable overheat of the central processor. Also, operability of system in the conditions of the increased energy consumption is checked. The most responsible moment thus is regulating the central processor. As a result of the test its optimum tension, frequency and delays of data reading from memory are found. The analysis of stability of characteristics of the RAM, in particular, a condition of its tires in the course of experiment is made. As the executed tests took place within the standard range of characteristics of modules, and, therefore, the margin of safety put in the computer and capacity of system wasn't used, further experiments were made at extreme dispersal in the conditions of air cooling. The received results are also given in the offered article
-
Description
The problem of availability and quality of medical care is a priority nowadays. The Medical Centres for Information and Analysis (MCIA) have been created in the regions for the purpose of gathering information about the quality of services rendered and subsequent data are transferred to the Ministry of Health Care of Russia. Regional MCIA are complex and developed systems that solve simultaneously many problems, one of which – the organization of collection, processing, recording and analysis of information on the provision of medicines. It has been established in the course of conducting an analytical review of examination systems of preferential recipes and information protection that the level of automation of routine operations of the MCIA activity of the Krasnodar Region is high, but there is no qualitative information processing. As a result of the comparative analysis it was determined that the automated review of medical prescriptions for privileged drugs allows identifying abnormalities in the reference data without any analytical conclusions about the causes and consequences of the case. Taking into account the fact that in the provision of essential medications there still exists quite understandable demand for software products which automize the routine work of specialists, it remains obvious that the directions of improvement of software products are not implemented fully. In this regard, the present research proposes measures to improve the existing systems by integrating with the information system of medical and economic control of the prescription of medicines
-
MATHEMATICAL MODEL OF THE PROCESS OF GRANULATION OF RAW WOOD WITH A HIGH DEGREE OF DAMAGE OF ROT
DescriptionThe article presents the mathematical model for determining the temperature after passing trough nozzles of press-granulator, which allows to take into account heat loss through the exterior surface
-
Description
Conditions in which the work of acoustic magnetic device proceeds are complicated because of the number of interconnections. Solving problems under such conditions analytically is difficult because of many variables and complexity of some dependencies. The article describes the conditions in which the work of acoustic magnetic device, designed for nonchemical treatment of hydroponic solution, takes place. The criteria, establishing the initial state of the chains, containing mutual inductance, are analyzed. The work establishes the criteria relating the physical parameters of the environment with the output parameters of the device. The similarity of conditions of heat transfer on the surface of the device is provided, and the relation of the scale of temperature and power lost when heating the ferrite and winding machine is determined. The criterion of the heat transfer process is defined. The criterion, determining the relation of the environment temperature to the thermal mode of the acoustic magnetic device, is defined. The criterion of the conditions at the boundaries of the system and cavitating liquid is determined. It is found, that the cavitation area appears in the technological volume of liquid at the work of acoustic magnetic device. The criterial equation for geometric parameters of different types and constructions of the acoustic magnetic device is defined. In accordance with the task based on the third theorem of similarity, the group of criteria that provides the similarity of the model to the proposed original by all existing indicators, is selected
-
Description
The article analyzes the ways of ensuring a stable quality of vegetable raw materials in the process of storage and use of biopreparations patented in Russia and abroad. The search was conducted in the period from 1995 to 2015 on the databases of the patent agencies of the Russian Federation, the United States, Japan and the European Patent Organization. We have systematized the patented methods, the implementation of which can increase the shelf life of vegetable raw materials. The study led to the conclusion of the usefulness of developing innovative ways of ensuring a stable quality of vegetable raw materials in the process of storage using biopreparations
-
METHODS OF CHOOSING DIAGNOSED VEHICLE PARAMETERS IN AGRICULTURE
DescriptionThe article presents an analysis of the existing approach to automobiles technical maintenance in agriculture. We have pointed out that in modern conditions it is impossible to forecast the automobiles maintenance operation frequency and as a result its improvement as well. It is obvious that one cannot achieve the considerable increase of maintenance operation efficiency by separate means and there exist the necessity to treat it as a system and use the up-to-date methods to investigate and improve complicated systems. We have made a conclusion that the increase of maintenance operation efficiency is not possible without some rational strategy of maintenance operation and repair. We have shown that the program of maintenance operation and repair being an integral part of automobiles technical maintenance has considerable effect on maintenance and repair quality. As a result, there is some necessity of the developed system of parameters diagnosing and control in technical maintenance and repair. We have shown that to get sufficient diagnose information one needs selection of the controlled parameters which give maximum information about the object technical status taking into account possible characteristics of its operational faults. We have discovered that in order to solve the task it is necessary to have the object’s information pattern, calculation of possible characteristics of the controlled object being in good or bad order due to some parts fault, evaluation of information brought by every parameter and determining parameters to be diagnosed. We have proposed to evaluate the parameters’ information value with the help of information entropy as uncertainty measure that is one of the main concepts of the information theory. Because of solving the task, we have got the aggregate of the controlled automobile parameters orderable according to the amount of information
-
HOW TO SOLVE THE TASK OF CLASSIFICATION OF TYPES OF RIFLE AMMUNITION USING THE METHOD OF ASCANALYSIS
DescriptionIn forensics there is an urgent need to determine the type of rifle (automatic, rifle, large caliber pistol) depending on its used ammunition found at the scene of the use of weapons. We offer a solution to this problem with the use of new innovative method of artificial intelligence: automated system-cognitive analysis (ASC-analysis) and its program toolkitwhich is a universal cognitive analytical system called "Eidos". In the "Eidos" system we have implemented the software interface that allows posting of images and identifying their outer contours. By multivariable typing, the system creates a systemic-cognitive model, the use of which, if the model is sufficiently accurate, may be helpful in solving problems of system identification, prediction, classification, decision support and research of the modeled object by studying its model. For this task the following stages: 1) input images of ammunitions into the "Eidos" system and creation of their mathematical models; 2) the synthesis and verification of the models of generalized images of ammunition for types of weapons based on the contour images of specific munitions (multiparameter typing); 3) improving the quality of the model by separating classes for typical and atypical parts; 4) quantification of the similarities-the differences between specific types of munitions with generic images of different types of ammunition of the weapon (system identification); 5) quantification of the similarity-differences between types of ammunition, i.e. cluster-constructive analysis of generalized images of ammunition. A numerical example is given. We also possess a successful experience of solving similar problems in other subject areas
-
Description
The problem of drug addiction in the Russian Federation poses a threat to the national security. For effective decision-making in the field of drug prevention and fight against drugs, it is necessary to assess the drug situation, the state of law enforcement practices and socio-economic development of the observed areas. The article describes the method of complex statistical evaluation of the level of drug addiction in the Russian Federation. Based on a systemic approach author distinguishes stages of multivariate statistical analysis of a priori indicators characterizing the state of socio-economic, demographic, biomedical and law enforcement situation in certain areas of the federal districts of the Russian Federation. The classification of signs into factorial indicators groups is proposed. Estimations of relationships studied statistics and draw conclusions about the impact on the drug situation of various factors, including the average for the group, are presented. Then this paper describes the application of the factor analysis to construct regression models to predict the drug situation in the Russian Federation according to the status of independent indicators and trends in the integrated development of regions. A method for evaluating the level of development of the drug situation in the Russian Federation because of automatic classification algorithms is proposed and the principle of its application is proven. The results of the classification of the federal districts of the Russian Federation on the level of the drug situation are given
-
FINDING FUNCTIONS OF ENERGY AND ACCUMULATION WIND PERIODS FOR THE SPECIFIED SPEED
DescriptionThe article describes a method for obtaining the functions of energy and accumulation wind periods, using the program Microsoft Office Excel. We have showed the algorithm of the programs that had been developed to reduce the processing time for large quantities of data. Obtained functions are recommended for determining the optimal parameters of autonomous windpower stations with accumulated reserve
-
TECHNICAL AND ECONOMIC PERFORMANCE OF VM32 MACHINE MULTI-COMPLEX
DescriptionThe article describes problems of economic growth of the Russian Federation, development of high-tech knowledge-intensive manufacturing industries on the basis of a fundamentally new technological order, creation and development of import-substituting production of engineering resources that relate to dual-use technology and are in the most demand by strategic organizations of machinetool, machine-building and military-industrial complexes (aircraft engineering, rocket and space engineering, shipbuilding and power engineering). We proposed some measures to improve the accuracy in the manufacture of complex and large-sized parts with weights up to 100 tons. Precision machining of the workpiece surface is directly dependent on the tooling, quality and quantity of the cutting tool (CT), as during the processing the CT wears and must be replaced. We have described the modernization of multi-machine complex and ways of increasing the accuracy, the change in the kinematics tool supply to increase the number of tools used in the processing. We made calculations of the new chain drive of the tool supply. The proposed modernization of the tools will increase the instrument amount that allows increasing the accuracy of manufacturing products. We have also made calculations of the economic effects of the tool supply modernization