05.00.00 Technical science
-
FORMATION OF BASICS FOR EQUIPMENT UTILIZATION ON VARIOUS LEVELS OF ITS LIFE CYCLE
DescriptionNowadays, in Russia the problem of utilization of self-propelled vehicles has not been solved yet. This problem remains because in Russia there is no accurate system of cooperation between developers, producers and customers of mechanical products. The article analyses Russian and foreign experience in solving this issue, gives brief information about working out Russian system of agricultural machines utilization
-
PHILOSOPHY OF SYNTHESIS OF TECHNICAL SYSTEMS’ SCHEMES
DescriptionMethodological basis of synthesis of the technical systems’ schemes is considered. The basis of the technical idea’s development is contemplated. The article deals with the general schemes of inventive activity’s development
-
PHYSICAL MODELING OF ODOMETRIC COMPRESSION OF SAND
DescriptionThe odometric compression of sand with constant rate of loading (CRL) or constant rate of deformation (CRD) and continuous registration of the corresponding reaction allows to identify the effect of stepwise changes of deformation (at the CRL) and the power reaction (at the CRD). Physical modeling of compression on the sandy model showed the same effect. The physical model was made of fine sand with marks, mimicking large inclusions. Compression of the soil at the CRD was uneven, stepwise, and the strain rate of the upper boundary of the sandy model changed cyclically. Maximum amplitudes of cycles passed through a maximum. Inside of the sand model, the uneven strain resulted in the mutual displacement of the adjacent parts located at the same depth. The growth of external pressure, the marks showed an increase or decrease in displacement and even move opposite to the direction of movement (settlement) the upper boundary of the model ‒ "floating" of marks. Marks, at different depths, got at the same time different movements, including mutually contradictory. The mark settlements sudden growth when the sufficiently large pressure. These increments in settlements remained until the end of loading decreasing with depth. They were a confirmation of the hypothesis about the total destruction of the soil sample at a pressure of "structural strength". The hypothesis of the "floating" reason based on the obvious assumption that the marks are moved together with the surrounding sand. The explanation of the effect of "floating" is supported by the fact that the value of "floating" the more, the greater the depth
-
Description
In the article we have submitted physical fundamentals of processing machinery and equipment repair and recovery formulations; above all, the physical picture of the process of friction on the example of a pair of steel – iron is given
-
PHYSICAL AND CHEMICAL PROPERTIES AND FRACTIONAL COMPOSITION OF THE STAVROPOL OIL
DescriptionPhysical and chemical characteristics of the Stavropol oil are provided. The found value of density of 853,6 kg/m3 is low and shows that oil mainly contains light paraffin hydrocarbons. Distillation of test of oil is carried out on the device of rectification of ARN-2 oil to laboratories of the Tuapse oil refinery. On the basis of experimental data, the curve of oil ITK is constructed. The chromotographic analysis determined a mass fraction of C1-C6 hydrocarbons in a model of test of oil. The conclusion is drawn that according to GOST 31378-2009 regulations the sample of oil can be carried depending on a mass fraction of sulfur to the 2nd class ("sulphurous"); on density – to the 2nd type ("averages"); on content of chloride salts, waters, mechanical impurity – to the 1st group; on a mass fraction of hydrogen sulfide, marked - and etilmerkaptan in the amount – to the 1st type. The sample of oil is characterized by the low temperature of hardening (minus 15 °C)
- Description
-
PHYSICAL AND MECHANICAL PROPERTIES OF NANOMODIFIED "POOR" CONCRETE ROAD CLOTHING BASE CREATION
DescriptionThe experimental data of the study of physical and mechanical properties of nanomodified "poor" concrete for road clothing base creation is presented in this article
-
PHENOMENOLOGICAL APPROACH TO THE DESCRIPTION OF TRANSPORT PROCESSES IN LOOSIBILE MATERIALS
DescriptionA mathematical description of the potentials of mass-transfer of hygroscopic materials is possible on the basis of analytical expressions describing sorption and desorption isotherms. Because of the complex nature of the interaction of colloidal capillary-porous materials with moisture, determined by the action other than sorption forces (physical sorption, absorption, chemisorption), capillary condensation forces and osmotic forces, which for different materials are specific and quantitatively different, to date There is no single universal dependence for the analytical description of isotherms of sorption and desorption. Accordingly, there is a wide variety of analytical expressions for the description of isotherms of sorption and desorption. There are many different methods of analytical description of the sorption properties of colloidal capillary-porous materials. All known methods can be divided into two groups: the first should include analytical expressions derived theoretically on the basis of various hypotheses and assumptions, while the second - purely empirical based on the expansion or change in the forms of models of the first group. A large number of equations of equilibrium isotherms are mathematically equivalent. Thus, the method of determining the transport potential based on position allows us to take as a basis for calculation the experimental data on the hygroscopic properties of certain materials and to use the phenomenological approach for the engineering calculation of complex technical devices
-
Description
In this article, on the basis of phenomenological consideration of kinetic processes in semiconductors volume, we have conducted an analysis, in order to estimate the drift and diffusion components of the output current for hot carriers in the total output of the conductivity structure of the chip. The result revealed amplitude and frequency characteristics of this component of the conductivity, illustrating a greater amount of its modulus and phase inversion near the field-strength values of Ghan effect. This can be used for designing oscillators of millimeter range of wavelengths. It is shown that the nonlinear diffusion component along with the drift is important for the output conductance of the test specimen
-
Description
In the article, application of methods of self-organizing for identification of processes of weight carrying polluting components of underground waters for the purpose of optimization of technogenic loading on environment is considered