FSBSI Agricultural Research center «Donskoу»
Author list of organization
List of articles written by the authors of the organization
-
06.01.05 Selection and seed production of agricultural plants (agricultural sciences)
DescriptionThe purpose of the work was to test the winter wheat varieties artificially infected with North-Caucasus brown rust to identify its harmfulness. There was carried out a two-stage testing on two sets (8 and 10) of varieties that differed in their resistance to the pathogen. As a result, there has been identified high brown rust harmfulness in susceptible varieties, which led to a yield decrease from 16.3 to 32.2%. Among the maximum infected varieties, there has been identified the most tolerant variety ‘Tarasovskaya 29’ which, when damaged to 100%, had a minimum yield decrease (less than 10.6%). The poorly susceptible to brown rust varieties reduced their yields from 11.2% to 20.7%. Among them, the variety ‘Spartak’ showed lower rates of a yield decline. Among the five varieties that showed an average brown rust affection, there have been noted various indicators of a yield decrease. The variety ‘Donskaya Yubileynaya’ showed a minimum decrease of a yield and its structural elements under the conditions of artificial infection with brown rust; and together with the variety ‘Tarasovskaya 29’ can be classed to the varieties tolerant to brown rust. When predicting brown rust epiphytoty the susceptible and medium-resistant wheat varieties require obligatory protection with fungicides
-
TECHNOLOGICAL ASPECTS OF SOIL DEPLOYMENT
DescriptionThe article presents the results of research on the impact of tillage technologies on the value of its density in the cultivation of winter wheat in conditions of insufficient and unstable wetting of the south of Russia. Experimental studies were carried out in the conditions of a long-term stationary experiment with a four-field crop rotation with different variants of tillage (dump, layer-by-layer, small, surface). The soil density was fixed at spring tillering of winter wheat and at the end of the growing season. Conducted analysis of variance shows that the soil has relaxation abilities, i.e. over time, it restores its properties by compaction ability, since studies conducted during the period of tillering of winter wheat show that Ffact. Ftable. (5,794,76), i.e. methods of treatment have an impact on soil compaction, which cannot be said for the case at the end of the growing season of winter wheat. The ability to restore its properties is a remarkable property of the soil, as it prevents them from over-compaction. The energy intensity of the compacted soil treatment increases to 30%, while the degree of crumbling is significantly reduced and its lumpiness increases. The most fundamental way to reduce the density of the soil is its timely loosening by working bodies of agricultural tools. Tillage methods affect soil density, the correlation coefficient between tillage methods and soil density varies between 0,929-0,979. The most radical way of soil decompression is exposure to it by a certain type of working bodies
-
RESOURCE CONSERVATION IN THE PRODUCTION OF SPRING BARLEY
DescriptionThe article discusses the possibilities and presents the results of research on the cultivation of spring barley with different production technologies in conditions of insufficient and unstable wetting of the south of Russia. Experimental studies were carried out in a stationary experiment with a four-field crop rotation with different variants of tillage (dump, flat-cut, layered, without tillage – no-till). It is established that the most expensive is the waste treatment of the soil (PN-5-35), and the least expensive is the technology excluding the impact on the soil. At the same time, the operating costs of labor and fuel consumption at no-till are lower, respectively, by 82-107, 23-48, 131-188% in comparison with traditional types of technology. Hectare fuel consumption with zero technology is 131-188% less than with traditional technologies and amounted to 22.8 kg / ha. The cost of production of spring barley using no-till is 8-41% lower compared to flat-cut, layer-by-layer, and dump technology and amounts to 285 rubles per cent. Calculated per 1 hectare, labor costs, fuel consumption, wages, fuel costs, deductions for renovation and repairs, as well as total operating costs for traditional basic tillage technologies increase, respectively, 1,23-1,48; 2,31-2,88; 1,30-1,56; 3,1-3,81; 1,65-1,85; 1,81-1,96; 1,83-2,09 times compared with no-till. The use of spring barley cultivation technology that excludes impact on the soil provides a fairly high efficiency even at lower yields
-
EFFICIENCY OF USING COMBINED UNITS WHEN PREPARING SOIL UNDER WINTER CROPS
DescriptionIssues associated with the use of combined units in the preparation of the soil are relevant and of scientific and practical interest. Relevance increases when it comes to the cultivation of the main crop - winter wheat. In this regard, the presented results on the effectiveness of the use of combined units in the preparation of soil for winter crops are important. They are important primarily from a practical point of view. Experimental studies were conducted in the conditions of many years of stationary experience in the FSUE "ANC" Donskoy ", Zernograd, Rostov Region and in the Krasnodar region, LLC "Step". The efficiency of the use of combined units KUM-4, APK-4, developed at SKNIIMESH, now FSUE “ANC “Donskoy” in the cultivation of winter barley and winter wheat is considered. The technological process of tillage using combined units consists of several technological operations performed simultaneously. Disk working bodies chop plant residues and destroy weeds. At the same time, a network of cracks in the underlying soil horizons is laid. Next are flat-cutting working bodies that loosen the soil already at the set depth. There is a cutting of the root system of weeds, loosening the remaining non-loosened soil layer to the required depth, the formation of a flat bottom of the “furrow”, the separation of erosion-hazardous soil particles to the bottom of the furrow. Next, a roller - a compactor - compactor enters the work, which provides regrinding of soil lumps on the surface and subcompaction of the treated layer. The last in the process chain is a mulch roller, which ensures the formation of a compacted seed bed for seeds with simultaneous mulching of the compacted soil layer. The use of combined units in the technologies of cultivation of winter barley and wheat allowed to achieve a reduction in the number of technological operations by 1,5-2,5 times, an increase in the productivity of winter wheat by 0,4 t / ha (9%), a reduction in fuel consumption by 40%, operating costs 1,4 times with the economic effect of 1500 rubles / ha and the profitability of production of 140%
-
RESULTS OF RESEARCHES OF THE POSSIBILITY OF VIBRATION GRAIN SEPARATION FROM THE EAR
05.20.01 Technologies and means of mechanization of agriculture (technical sciences)
DescriptionEnhancing the operative parts of a threshing mechanism which are realizing direct mechanical impact on an ear and being in it grains it is impossible to achieve the considerable lowering and to completely exclude traumatizing grain. New methods of noncontact grain separation from an ear in case of the threshing need to be developed. These methods exclude direct mechanical impact of operative parts on grains. A perspective method of noncontact grain separation from an ear is the imposition to a culm with an ear of oscillating motion, perpendicular its axes. It is a resonance in different parts of an ear can cause. As a result of the pilot and theoretical studies it is set that when impart low frequency oscillations in the range 18…100 Hz corresponding to natural frequencies of its oscillations to a culm with an ear, it is possible to achieve corrupting of the ear or its separation from the culm as a result of a resonance. But grain separation, at the same time, does not come from an ear as the range of natural resonance frequencies of grain oscillations does not match the range of natural frequencies of a culm with an ear and has higher values. The analysis of results of theoretical researches shows that for noncontact grain separation from an ear without its traumatizing is the imposition to it high-frequency oscillations in the range 100 … 14000 Hz matching its natural frequencies of oscillations, which is proved to be perspective. The occurring resonance causes origin of own movements of grain that leads to its separation from the ear
-
Description
The article deals with the application of the theory of regulation for the synthesis of technological mechanical devices and their replacement by electrical or electronic analogs in order to reduce energy processes in soil cultivating and sowing machines
-
THE RATIONALE FOR THE USE OF COMBINED UNITS IN THE CULTIVATION OF WINTER WHEAT
06.01.01 General agriculture, crop production (agricultural sciences)
DescriptionIssues related to the use of combined aggregates in soil preparation are relevant and of scientific and practical interest. The relevance is increased when it comes to the cultivation of the main crop – winter wheat. In this regard, the presented results on the efficiency of using combined aggregates in preparing soil for winter crops are important primarily from a practical point of view. Experimental studies were conducted in the conditions of long-term stationary experience in the Federal state budgetary institution «Agrarian Science Center «Donskoy», Zernograd, Rostov region. The article considers the efficiency of using the combined unit APK-4, developed in "SKNIIMESH" now Federal state research institution of the «Agrarian Science Center «Donskoy» in the cultivation of winter wheat. The structural and technological scheme of a combined unit, the technological process of which consists of several technological operations performed at the same time, is justified. Disk working bodies crush plant residues and destroy weeds. This creates a network of cracks in the underlying soil horizons. Next, there are flat-cutting working bodies that loosen the soil to a set depth. The root system of weeds is pruned, the remaining loosened soil layer is loosened to the required depth, the formation of a smooth bottom of the "furrow", and the separation of erosive soil particles to the bottom of the furrow. Next, the roller starts working – a lump-crushing sealer, which provides crushing of soil lumps on the surface and sub-compaction of the treated layer. The last in the technological chain is a mulching roller, which provides the formation of a compacted seedbed for seeds with simultaneous mulching of the compacted soil layer. The use of the combined unit in the technology of winter wheat cultivation allowed to reduce the number of technological operations by 1,5-2,5 times, increase the productivity of winter wheat by 11-13% and the cost of production by 10,4-18,3 %
-
Description
The results of laboratory experiments on the effect of different concentrations of SkQ3 (10- (6'- methylplastoquinonyl) decyltriphenylphosphonium) on the rate of growth of spring barley seedlings of varieties Sokol and winter wheat varieties Kalym in normal and under inadequate moisture conditions, as well as data from field experiments on the effect of pre-sowing processing SkQ3 on the morphometric indices of spring barley varieties Shhedry, hard winter wheat of the Lazurite variety and soft winter wheat of the Lydia variety are presented. As a result of laboratory experiments, an increase in the growth rate of 14-day-old seedlings grown in solutions of polyethylene glycol was shown when treating the seeds with 2.5 nM and 25 nM with SkQ3 solutions. In the field experiments on the pre-sowing treatment of SkQ3 seeds, an increase in the morphometric indices of spring barley varieties of generic Lydia soft winter wheat and hard Lazurite winter wheat has been established, as well as an increase in the yield of winter wheat of both varieties as compared to the control
-
INFLUENCE OF THE TECHNOLOGY OF TILLAGE ON THE MOISTURE OF THE PRO-CESSED LAYER
05.20.00 Processes and machines of agroengineering systems
DescriptionCurrently in the South of Russia, the most acute problem of accumulation and preservation of productive moisture in arable layer of soil. This fact has a decisive influence on the yield of agricultural crops. The need to study the dynamics of accumulation of moisture of the treated soil due to the fact that at the first stage of development plants are very sensitive to moisture content in the rooting zone of the soil. Practically the regulation of the moisture content of the processed layer may correct the influence of soil tillage aggregates with different types of working bodies. The work was performed in FSRI of the «ASC «Donskoy» (Zernograd, Rostov area), in the conditions of stationary experience (4,3 ha), 2013-2015, where explores various technologies of soil treatment, including no treatment. To obtain comparable results the same selected set (rotation) of crops (winter wheat, spring barley, pea, vapor). As a result of researches it is established that on steam background (76,1-46,2 mm) content of productive moisture is more than two times higher than on other backgrounds (of 30,6-46,2 mm). This allows us to talk about the effectiveness of the fallow field from the point of view of accumulation of moisture. The analysis of statistical data allows making a conclusion about the impact of crops on the dynamics of productive moisture. On the other hand, the rating statistics of the received data with backgrounds treated with different technologies did not allow to find significant advantages to any of them, as the area under the curve ROС analysis does not exceed the value of 0,6. Therefore, the studied backgrounds in the period of the research have equal influence on the moisture content of the treated soil layer
-
OPPORTUNITIES TO REDUCE OPERATING COSTS IN THE PRODUCTION OF LEGUMINOUS CROPS
05.20.00 Processes and machines of agroengineering systems
DescriptionThe article considers the possibility of reducing the cost of tillage in the production of grain crops. The most important economic characteristic of production is operating costs. In terms of agricultural production, they represent the amount of contributions to wages, depreciation, repairs, and the cost of fuel, lubricants and other consumables. In this regard, the aim of the research was to determine the dynamics of operating costs in the production of legumes. Determination of the dynamics of operating costs was carried out on the basis of the results of studies of energy-saving technologies in a stationary experience. Variants of processing of the soil on the conventional technology was layered subsurface tillage combined unit, UNS-3, the layered subsurface tillage unit CUO-2 and conventional tillage (PN-5-35). No provision was made for zero tillage technology. As a result of the research it was found that on pre-sowing tillage and sowing, the value of operating costs varies for the crops under consideration, but has almost the same values (within each crop) for the methods of the main tillage. More preferable for this type of work is zero tillage, as it provides 21-29% lower operating costs due to direct sowing of crops. The highest operating costs for all the crops under consideration are observed in the main tillage. In the same technological period of work operating costs are the most variable. Thus, depending on the technology of the tillage when growing winter wheat, they change within 117,2-5229,2, the production of spring barley - to 167,8-4517,4 and in the production of peas – to 136,6-4517,4 thousand rubles