05.20.00 Processes and machines of agroengineering systems
-
STANDARD MANUFACTURING SCHEME ADAPTATION FOR A SMALL-SCALE INTRAECONOMIC MIXED FODDER PLANT
05.20.00 Processes and machines of agroengineering systems
Description
The research object are methods of standard manufacturing schemes adaptation for small-scale intraeconomic mixed fodder plants. The standard manufacturing scheme adapts for specific plant by process of elimination of unnecessary additional technological modules in this configuration, or in their changeover by other modules allowing to achieve the required quality level of processing of raw materials or compound feed by changeover of the available technological operations by more perfect and also in adding in the scheme of new modules. The adaptation algorithm of the standard manufacturing scheme for production the compound feeds is developed for the intraeconomic plant. The algorithm creates an opportunity as much as possible to consider specific conditions and needs of specific agricultural enterprise in case of design. Application of the adapted modular technological circuits on the designed small-scale formula-feed plants will allow to increase considerably nutritional value and biological safety of the produced compound feeds
-
ANALYSIS METHODS TO INCREASE THE CHARGING VOLTAGE OF THE ALTERNATOR
05.20.00 Processes and machines of agroengineering systems
Description
The article considers the problem of insufficient charging voltage during the joint operation of the battery and alternator. A comparative analysis of the proposed ways of increasing the charging voltage of the generator
-
EFFECT OF INITIAL CONDITIONS ON TRANSFORMER TRANSIENT CURRENTS
05.20.00 Processes and machines of agroengineering systems
Description
The article dwells on the features of the transition process in the transformer windings under non-zero conditions typical for the modes of drying the trans-former with low frequency currents. The article also shows the effect of non-zero conditions on the cur-rents in the windings and the heating of the windings
-
05.20.00 Processes and machines of agroengineering systems
Description
The article presents the results of studying the influence of the method of treatment before storage and storage parameters, including the relative air humidity, on the value of general losses of carrots. The taproots treatment before putting into storage was carried out with electromagnetic fields of extremely low frequency and the bio-preparation Vitaplan. After treatment, the taproots were kept at a temperature of +2±1°С for 56 days and +25±1°С for 21 days. In the process, the relative air humidity was changed from 40 to 90%. At a storage temperature of +2±1°C, the lowest total loss was observed at a relative humidity of 90%. At a storage temperature of +25±1°С, the optimal, from the point of view of decreasing the general losses, turned out to be the relative air humidity of 70%: with decreasing relative air humidity to 40%, significant increase of natural losses was observed, because the taproots were losing water intensively, and with increasing relative air humidity to 90%, favorable conditions were created for the growth of pathogenic microflora, which caused significant losses from the microbiological decay. The method of pretreatment of carrot taproots, providing the lowest general loss during storage in all the studied conditions, was joint treatment with ELF EMF and the bio-preparation called Vitaplan
-
INFLUENCE OF THE TECHNOLOGY OF TILLAGE ON THE MOISTURE OF THE PRO-CESSED LAYER
05.20.00 Processes and machines of agroengineering systems
Description
Currently in the South of Russia, the most acute problem of accumulation and preservation of productive moisture in arable layer of soil. This fact has a decisive influence on the yield of agricultural crops. The need to study the dynamics of accumulation of moisture of the treated soil due to the fact that at the first stage of development plants are very sensitive to moisture content in the rooting zone of the soil. Practically the regulation of the moisture content of the processed layer may correct the influence of soil tillage aggregates with different types of working bodies. The work was performed in FSRI of the «ASC «Donskoy» (Zernograd, Rostov area), in the conditions of stationary experience (4,3 ha), 2013-2015, where explores various technologies of soil treatment, including no treatment. To obtain comparable results the same selected set (rotation) of crops (winter wheat, spring barley, pea, vapor). As a result of researches it is established that on steam background (76,1-46,2 mm) content of productive moisture is more than two times higher than on other backgrounds (of 30,6-46,2 mm). This allows us to talk about the effectiveness of the fallow field from the point of view of accumulation of moisture. The analysis of statistical data allows making a conclusion about the impact of crops on the dynamics of productive moisture. On the other hand, the rating statistics of the received data with backgrounds treated with different technologies did not allow to find significant advantages to any of them, as the area under the curve ROС analysis does not exceed the value of 0,6. Therefore, the studied backgrounds in the period of the research have equal influence on the moisture content of the treated soil layer
-
OPPORTUNITIES TO REDUCE OPERATING COSTS IN THE PRODUCTION OF LEGUMINOUS CROPS
05.20.00 Processes and machines of agroengineering systems
Description
The article considers the possibility of reducing the cost of tillage in the production of grain crops. The most important economic characteristic of production is operating costs. In terms of agricultural production, they represent the amount of contributions to wages, depreciation, repairs, and the cost of fuel, lubricants and other consumables. In this regard, the aim of the research was to determine the dynamics of operating costs in the production of legumes. Determination of the dynamics of operating costs was carried out on the basis of the results of studies of energy-saving technologies in a stationary experience. Variants of processing of the soil on the conventional technology was layered subsurface tillage combined unit, UNS-3, the layered subsurface tillage unit CUO-2 and conventional tillage (PN-5-35). No provision was made for zero tillage technology. As a result of the research it was found that on pre-sowing tillage and sowing, the value of operating costs varies for the crops under consideration, but has almost the same values (within each crop) for the methods of the main tillage. More preferable for this type of work is zero tillage, as it provides 21-29% lower operating costs due to direct sowing of crops. The highest operating costs for all the crops under consideration are observed in the main tillage. In the same technological period of work operating costs are the most variable. Thus, depending on the technology of the tillage when growing winter wheat, they change within 117,2-5229,2, the production of spring barley - to 167,8-4517,4 and in the production of peas – to 136,6-4517,4 thousand rubles
-
ENGINEERING OF TRANSPORT MACHINES SCREW ENGINES FOR RICE AND FISH FARMING FACILITIES
05.20.00 Processes and machines of agroengineering systems
Description
The article considers manufacturing techniques and assembling screw propellers of transport vehicles for rice and fish farms. The increase in technological capabilities, reliability and carrying capacity of transport vehicles is achieved by making the propeller screw, with the possibility of its rotation. We called such propellers screw propellers, since along their perimeter along the entire length, multiple-curved curved surfaces are formed in the form of helical grooves of various configurations, sizes and shapes. The spatial form of the screw propellers is made with screw surfaces in the form of helical grooves, which ensures that the transport machines for rice and fish farms are conveyed on land, on water, through swampy and difficult terrain at a sufficiently high speed. As a result of the work performed, not only the designs of screw propellers and their classification were proposed, in which there is a general principle that allows the development of still unknown structures of propellers, but also their manufacturing techniques. The design of screw propellers was performed using the KOMPAS-3D software package using descriptive geometry and engineering graphics
-
ULTRA-LOW VOLUME SPRAYER'S PERFEC-TION FOR GARDENS AND VINEYARDS PRO-CESSING
05.20.00 Processes and machines of agroengineering systems
Description
The urgency of the task in creating a reliable plant protection system is the improvement and development of new technologies for spraying crops on the basis of fundamentally new agricultural requirements at a higher quality level, increasing productivity, reducing energy costs and greening protective measures. Pneumatic slotted sprayers have great design capabilities allowing obtaining operating parameters necessary for the specific task of the sprayer. In this regard, we have proposed a technological scheme of the sprayer in the garden-vineyard version. To do this, the sprayers are placed in pneumatic ducts of the fans mounted on the sprayers. It is possible to reduce energy and resource costs, to achieve high quality indicators of the process and to increase the level of environmental friendliness by developing technical means for ultra-low-volume spraying. The principal novelty in solving the problem of ultra-low volume spraying is the use of KubSAU design pneumatic sprayers on the sprayer, and the scheme of the technological process, allowing the reduction of the working fluid and pesticides doses rate, resulting in reduced operating costs to support operations: preparation of working fluids and filling the sprayers. To process two rows simultaneously, it is possible to use sprayers equipped with two centrifugal fans with the installation of pneumatic slit sprayers with fixation in the ducts that they overlap, forcing the air from the fan to pass through the atomizer body, mixing with drops of working fluid. In this case, the speed of the air-droplet jets increases and more efficient use of the air jet from the fan occur. Along with the use of sprayers, equipped with KubSAU design pneumatic sprayers, to combat pests and diseases, we propose to use a sprayer to combat weeds in the trunk area of perennial plantations. Thus we have a family of ultra-low volume sprayers with pneumatic slotted sprayers of the Kuban State Agrarian University design
-
RESEARCH OF THE INFLUENCE OF THE TREATMENT BEFORE STORAGE METHOD ON THE QUALITY OF CARROTS
05.20.00 Processes and machines of agroengineering systems
Description
The article presents the results of a study of the influence of the processing method before storage on the commercial quality of carrot roots during storage. The object of the research was carrot of the Abaco variety. Objects of study were stored for 21 days at + (25 ± 1) ° C and 56 days at + (2 ± 1) ° C. Roots were treated with extremely low frequency electromagnetic fields (EMF ELF) and Vitaplan biopreparation separately and in combination. As a result of the research, it was established that the complex treatment of EMF ELF and biopreparation allows increasing the yield of standard carrot products compared to the control: 11.8% at storage temperature + (2 ± 1) ° C, 24.1% at storage temperature + (25 ± 1) ° C. A reduction in the total losses of carrots, treated with complex EMF ELF and biological product, was found by 5.8% at storage temperature + (2 ± 1) ° C and by 12.4% at storage temperature + (25 ± 1) ° C
-
05.20.00 Processes and machines of agroengineering systems
Description
The article presents the results of the research of the influence of preliminary treatment of garden beet roots with electromagnetic fields of extremely low frequency on the loss of dry and biologically active substances, such as vitamin C and P-active substances, in the process of long term storage. Garden beet roots of Bordo 237 variety were the objects of research. The objects of research were stored for 7 months at a temperature of 0…+1° С and relative humidity of 90 %. Sampling was carried out every month during the entire storage period. The treatment with electromagnetic fields of extremely low frequency was carried out using an experimental setup of our own assembly. As a result of the conducted research it is established, that the treatment of garden beet roots of Bordo 237 variety with electromagnetic fields of extremely low frequency before dispatching into storage allows to decrease the losses of dry substances by 4,1 % by the end of the 7 months storage period, and also to decrease the losses of vitamin C by 14,8 % and P-active substances by 15,1 %. The data obtained can be used to develop new or improve existing technologies of garden beet roots storing
pdf 154.771kb
doc 154.771kb