South Federal University
Author list of organization
List of articles written by the authors of the organization
-
Description
In the Southern Federal University on the genetic basis of sunflower inbred line 3629, a collection of plastid mutants with varying degrees of chlorophyll deficiency was created by inducing Nnitrosomethylurea. Chlorophyll content was associated with their photosynthetic activity. It was found that the lower the chlorophylls content in mutant plastids, the lower the sugar concentration in plant tissues. For example, during the entire period of plant growth for whites (1.0-3.0 % chlorophylls a+b from control) var- 10, var-17 and yellows (6.0-9.5 % chlorophylls a+b from control) var-29, var-33 leaf areas of variegated mutants depending on the development phase and the content of green pigments are characterized by a low (2-7 fold) sugar content. Yellow-green (75.5% chlorophylls a + b from control) leaves of en:chlorina- 7 contain a higher level of carbohydrates, although it is 1.5-2 fold lower than at line 3629. Monosaccharides are products of hydrolytic reactions catalyzed by β- glycosidases. It was shown, that the activity level of β- galactosidase and β-glucosidase exceeded the corresponding indicators of the control at 1.5-2 and 2-7 fold, respectively. Similarly to enzymes from the water-soluble fraction, membrane-bound β- glycosidases also showed increased activity in the leaves of the investigated mutants, compared to the control green plants of 3629. Consequently, the activity of β-glycosidases increases dramatically in leaf tissues with deficiency of photosynthetic. Thus, chlorophyll mutations can lead to a change in the expression of nuclear genes, resulting in a significant increase in the activity of β-glycosidases in the mutant organelles themselves
-
RESULTS OF INTRODUCTION OF SPECIES OF FAMILY CAPRIFOLIACEAE JUSS. IN SFedU BOTANICAL GARDEN
DescriptionThe results of the introductory test of 22 species of the family Caprifoliaceae from 5 genera are analyzed: Abelia R. Br. (1 species), Diervilla Mill. (1 species), Kolkwitzia Graebn., Lonicera L. (15 species), Symphoricarpos Ducham. (2 species), Weigela Thunb. (2 species) in the Botanical Garden of SFedU. The estimation of ecological-biological properties, of degree of naturalization is given, of phenological development, of age status, of decorative longevity of these species. It has been established that 17 species have high winter hardiness: Kolkwitzia amabilis; Lonicera caprifolium, L. coerulea, L. chrysantha, L. demissa, L. dioica, L. ferdinandii, L. gracilipes, L. × heckrotii, L. japonica, L. morrowii, L. tatarica, L. × tellmanniana, L. trichosantha, Symphoricarpos hesperius and S. occidentalis, Weigela praecox; drought-resistant: Abelia × grandiflora, Kolkwitzia amabilis; Diervilla rivularis, Lonicera acuminata, L. caprifolium, L. confusa, L. chrysantha, L. demissa, L. ferdinandii, L. × heckrotii, L. japonica, L. morrowii, L. tatarica, L. × tellmanniana, L. trichosantha, Symphoricarpos hesperius and S. occidentalis, Weigela floribunda; medium-drought-resistant: Lonicera coerulea, L. dioica, L. gracilipes, Weigela praecox. Period of preservation of decorative qualities in plant ontogeny: Abelia × grandiflora - not less than 10 years; Diervilla rivularis, Lonicera dioica, Weigela praecox - 15-20 years; Lonicera demissa, L. gracilipes, Weigela floribunda - 20-25 years; Lonicera acuminata, L. caprifolium, L. coerulea, L. confuse, L. chrysantha, L. etrusca, L. ferdinandii, L. × heckrotii, L. japonica, L. morrowii, L. tatarica, L. × tellmanniana, species of Symphoricarpos – 25-30 years, Kolkwitzia amabilis – 30–35 years, Lonicera trichosantha 35–40 years
-
SOLUTION OF THE OPTIMIZATION PROBLEM FOR ELASTIC-DAMPING MECHANISM PARAMETERS IN PLOWING MODE
DescriptionThe article is devoted to finding of the optimum parameters for elastically damping mechanism (EDM) which is located in transmission of machine-tractor unit (MTU). The investigated MTU is based on the tractor of 1.4 class in plowing mode. EDM is designed for MTU in order to make its’ start smoothly, to reduce the dynamic load in transmission, to protect engine from the external load vibration. The “transmittance level” (index T) is used as evaluation of the protective mechanism quality. The study was carried out by means of the experiment planning method, viz. the central composition plan of second order with five factors. A regression model for response function (“transmittance level”) is given. This model takes into account the chosen EDM characteristics. The statistical analysis methods (Student’s t-test, Fisher’s test) were used to study the regression model. The dependence of response function on each factor apart, their cross impact on the process are described. The system of partial differential equations is obtained to find the optimal values of parameters and response function. The optimal value of a “transmittance level” can be obtained by varying different EDM parameter values. Optimal values of parameters and as result - response function - allow improving of MTU functioning in plowing mode
-
OBJECTIVES AND METHODOLOGY OF CROSS-CUTTING DESIGN OF TECHNICAL SYSTEMS
DescriptionThe debate continues about reform of higher education In the country. We offer our point of view regarding the preparation of bachelors and masters on the direction of "Control of the technical systems". Department of automatic control systems leverages variable disciplines of specialization and optional subjects, forms a curriculum based on the needs of the business environment of the region or commissioned by a separate large enterprise. Students participate in the modules of project activities, form new and effective engineering solutions, to get skills of their practical implementation with regard to effectiveness, relevance and prospects of their further development. The production practice is very important in the preparation of bachelors and masters. To this end, the agreement on cooperation in the field of improvement of quality of preparation of students of SFedU concluded with the company RealLab (www.rlda.ru). It has allowed undergraduates to pass a work practice at the enterprise, custom-making thematic tasks of the enterprise on a contractual basis. Graduates of magistracy successfully find a job at the enterprise, providing thus strengthening of personnel structure. In this study, we propose a technique of teaching of bachelors and masters in "Control of technical systems". The main thesis is to use the technique of through projecting throughout the entire learning process. The trajectory of training is built for the student based on a module of project activity, training and production practices. The student studies the object, develops the control algorithm, programs it, chooses a set of technical means throughout the entire period of training with an exit to the protection of the final qualifying work
-
THE YOUTH SELF-GOVERNMENT IN RUSSIA: THE MOST IMPORTANT FACTORS, FUNCTIONS AND LEVELS
DescriptionThe article is devoted to the research of the main factors, functions and levels of the development of the youth self-government organizations in modern Russia. Youth self-government organizations represent one of the most successfully developing institutes of the civil society that uses the most efficient mechanisms of the participation of this category of citizens in the process of functioning of the governmental and non-governmental institutions and organizations. Youth self-government is characterized by such categories as versatility and divergence; it works at various levels and includes specific factors and functions
-
CONTROL OF TECHNOLOGICAL PROCESSES BASED ON SCADA
DescriptionSCADA is modern information technologies. The monitoring and control of various technological processes in industry and in agriculture are possible thanks to these technologies. The training complex is created to study features of SCADA systems. The domestic SCADA Trace Mode The domestic SCADA Trace Mode is used in this complex. Students study the abilities of this system on the example of the heating process. Trace Mode controls humidity and regulates temperature in a closed space. Its advantage consists in creation of automatical workstation. There are a device for accurate temperature measurement; Video, which repeats the work of the heater on the screen of the workstation. There is also a trend with graphs of humidity, of temperature; there is an alarm report with information on the magnitude and timing of the process failure. Among them, there is a device for accurate temperature measurement; video, which repeats the work of the heater. There is the picture with graphs of humidity, of temperature and of the target on a temperature also, there is a report of the alarms about information on the magnitude and timing of the failure the process. A distinctive feature of the developed this complex is to provide students opportunities for acquiring skills of design and operation training of the automated control system of technological process of heating with the holding of tests in real time. After studying one SCADA system, students are easily transferred to work in another system, for example, Master SCADA, domestic producer InSAT
-
COGNITIVE MODELING OF THE IMPACT OF SELF-ORGANIZATION FACTORS ON THE ENTERPRISE SUSTAINABILITY
DescriptionThis article discusses the problem of methodological support for the management of the recovery cycle of Russian industry, which is caused by the transformation of factors affecting the achievement of the required parameters of competitiveness. Given the low level of technological development, it is proposed to rely on the concept of sustainability in determining the strategy of re-industrialization in Russia. As a theoretical platform of such a concept, the ideas of intellectualization of enterprise management are proposed, which were developed in the foreign theory of industrial management. Thus, the main factors influencing the stability of the enterprise were correlated with elements of the "ADACOR holonic" -architecture of management, inspired by biological and evolutionary theories. An empirical analysis of the impact of self-organizing factors using the technology of cognitive modeling, which revealed a significant impact on the company's sustainability of environmental assessment factors. The state is revealed under which the effect of local stability within the limits of the parameters "Diagnostics of threats" and "Unpredictability of the environment" is achieved, which makes it possible to form a complex of management actions to regulate these parameters using the coenoses tools. The proposed interdisciplinary approach, based on a system of regularities of the physical and mathematical order, will greatly enhance the effectiveness of forecasting and the predictability of enterprise development
-
ABOUT THE ROLE OF DESIGN ACTIVITIES IN PREPARATION OF THE COMPETITIVE EXPERT
DescriptionThe article is devoted to methods of training specialists in universities that meet the current qualification and professional requirements of the employers. The work formulates requirements to graduates of educational institutions, which include not only training high-level, but also personal qualities, which together allows the graduate to become a competitive specialist. As a possible method of preparation of such experts we justified the introduction of elements of project activity in educational process of universities. The proposed nested structure of the typical educational program, identifies the modules that are part of it, specify the purposes and functions of each module in the implementation of the project methods. Advantages of training in case of realization of scientific design activities were shown. The use of design methods within the module of General subjects, organization and implementation of interdisciplinary modules design and science and engineering activities are proposed. We noted the necessity of temporal and semantic coordination between all modules of the educational program with the aim of obtaining the maximum effect from the implementation of project methods in the educational process. It is proved, that the implementation of the project activity during training students not only develop competencies of educational standard, but also acquire and forming their own competencies needed for future career. The conditions of effective implementation of scientificresearch and design activities within universities were formulated
-
Description
In the article we have stated results of the monitoring of local populations of rare plans species in the territory of the nature monument (NM) of the Rostov region «Raznotravno-tipchakovo-kovylnaya steppe» (Zernogradsky district). Vegetation of NM belongs to the poor version of the Azov steppe, flora contains 291 species, including 13 rare species (Astragalus ponticus Pall., Bellevalia sarmatica (Pall. ex Georgi) Woronow, Calophaca wolgarica (L. f.) DC., Caragana scythica (Kom.) Pojark., Centaurea talievii Kleop., Crambe pinnatifida R. Br., C. tataria Sebeok, Crocus reticulatus Stev. ex Adam, Eriosуnaphe longifolia (Fisch. ex Spreng.) DC., Iris pumila L., Stipa pulcherrima К. Koch, S. ucrainica P. Smirn., Tulipa schrenkii Regel), included in the Red List of the Rostov region, including 6 species included in the Red List of the Russian Federation. In 2016 were specified the patterns of rare species distribution in NM borders, and also other important parameters of their populations (number, density, age structure, etc.). The group of rare plants species, included in the Red List of the Rostov region, in the territory of NM includes 65 % of their total number known in Zernogradsky district. The special sozological value of NM is determined by the large local populations of Calophaca wolgarica, Astragalus ponticus and Crambe pinnatifida. Local populations of all rare species in the territory of NM can be considered to be steady as inhabit here during last 50 years
-
MODELING NEURAL INTERACTIONS WITH THE USE OF CELLULAR AUTOMATION
DescriptionThis article considers the organization of neuralnetwork interactions based on models of cellular automata. These models are focused on improving the efficiency of the iterative processes of functioning of neural networks and their learning. The models considered in this article are presented in the form of two-level hierarchical structures. Models of the lower level are defined as "cellular neural element". They are based on formal descriptions of the dynamic neurons with the additional insertion of the state functions and the special procedures of formation of the specified function. Also, we have added special methods for forming patterns of activation functions. The conception of developed models is based on the use of the theory of graphs, theory of neural networks and the mechanism of cellular automata. These models will be used as the basis for software modeling