05.00.00 Technical science
-
Description
In complex multiparameter technical systems there are numerous and varied physical processes which, on the one hand, have a significant impact on the performance of those systems, and on the other hand, it is extremely difficult amenable to description in the form of meaningful analytical models based on equations, because these models must take into account the specific features of the systems. As a consequence, the development of conceptual analytical models is a "hand-made work" and it is associated with a large number of simplifying assumptions that reduce their versatility and reliability. But there is also another principle of modeling: the construction of phenomenological information models, i.e. models that do not have analytical forms of representation that describes the simulated system superficially as a "black box". Such models can be built directly based on empirical data and with the appropriate software it can be a standard technology much faster and much less time consuming than developing meaningful analytical models. On the other hand, the phenomenological information model can be sufficient to determine the rational design features and parameters of the modes of operation of complex technical systems. Besides, such phenomenological models can be viewed as the first stage in the development of meaningful analytical models. It is proposed to use a new universal innovative method of artificial intelligence for creating phenomenological models of complex technical systems: automated system-cognitive analysis (ASC-analysis) and its programmatic Toolkit which is a universal cognitive analytical system called "Eidos". In the system of "Eidos" we have implemented a software interface that provides direct input into the system large amounts of empirical data from an Excel file. The system of "Eidos" can directly (based on empirical (experimental) data) calculate how much information about the results of the technical systems is contained in the facts of possessing certain specific structural elements and certain values of the parameters modes of its work. On this basis, the system provides research-based and appropriate recommendations for the rational choice of design features and parameters of the operation modes of the simulated system
-
DATA PROTECTION IN PUBLIC WI-FI NETWORKS
DescriptionWhile shopping, everyone is at risk of processing, use, and, as a consequence, dissemination of their personal data. We pay with a credit card, sometimes leaving our contact information, making the discount card and subscribing to various events, connecting and using a public Wi-Fi network in places where it is provided. Even our chaotic movement through the Mall is monitored, with the aim of creating logistics customer flow. Here, to help managers and executives of shopping centers, high technologies come. The companies already go beyond standard video recording devices and sensors invoice on the front door, letting your eyes for our phones. At the moment some companies are implementing monitoring smartphones using a Wi-Fi signal. This service will allow you to track the attendance of site, conversion of the people who pass by the object and its visitors, distribution of visitors for the facility, directions to consider regular and new visitors, the amount of time that visitors spend in the shopping center, but also to determine the hours of flows and downs of attendance during the day, in other words, to build a complete statistical report
-
Description
In the article, we have described the main causes of the fuel-air mixtures explosion and such affecting factors as air blast and fragmental fields. Explosions are performed using various sources of energy. The scale of the explosions consequences depends on their detonation power and the environment in which they occur. The range of the affected areas can reach several kilometers. The basic parameter that characterizes the explosives is the maximum pressure. Increasing distance from the explosion, the maximum pressure and pulse decrease and action duration increases. There is presented method, which is developed in Windows-based applications that allows investigate the dependence of the destruction level on the distance and the explosion epicenter. Algorithm of application operation implements automatically filling of the "molar mass of combustible material, g/mol" field depending on the user’s choice of the flammable substance name. After calculating the raw data, the user moves to the calculation of all the parameters and sees the results of the calculation. By default, the calculation results are presented in tabular form. Further, the results of calculation are presented with a graphical representation of data. The developed software can be used in the educational process at studying such disciplines as "Theory of burning and explosion", "The production safety", "Protection in emergency situations", and also be recommended to practical workers in the sphere of labor safety, prediction and assessment of the technological accidents and catastrophes consequences, teachers of this profile disciplines
-
Description
In agriculture the issue of enhancing the efficiency of operation of internal combustion engines (ICE), reducing the costs of maintenance (TO) and repairing (TP) fuel supply apparatus (TA) using the improvement of methods and means of diagnosis is a topical in connection with the aging rolling stock farming and lack of investment. Analysis of the known TA diesel engine vehicles systems showed that the most widespread system is the divided type with multiplunger high pressure fuel pump (fuel pump), while the methods of its diagnosing are laborious, they require partial disassembly and have insufficient accuracy. The mathematical models that characterize the work of a high-pressure fuel pump (fuel pump) use a large number of parameters that significantly affect the quality of dynamics of the change of pressure values of diesel fuel. However, in the materials of previously published articles there were no issues considered assessing the extent of the quantitative impact, performance and features change in the sensitivity settings of the mathematical models on the simulation results, there are no recommendations on the degree of sensitivity and importance of each of the parameters. For a more accurate diagnosis of the fuel supply apparatus of a diesel engine it is advisable to use several methods of diagnosing. The article substantiates development of a mathematical model of a high-pressure fuel pump based on the analysis of modern methods of diagnosing of fuel equipment for autotractor diesel engines
-
Description
The article contains an analytical overview of the causes of local washouts on hydraulic installations of Don highway networks. One of the major outlet structures of the main canal is the terminal resets in Sadkovskaya gully (Veselovsky reservoir 1115+79), with a maximum flow rate of 50 m3/sec, designed for irrigation and desalination of Veselovsky reservoir. To analyze the effect of the liquid on the bottom of the outlet structures we need to know the kinematic parameters of the liquid in the channel. Until now there are no universal correlations, which would allow calculating these parameters. The mathematical dependences allow analyzing the impact of water flow on the bottom of the spillway constructions of melioration canals. Modeling of local scour of channels is based on a thorough analysis of the causes of this phenomenon. The main ones are the kinematic parameters of the liquid, the speed and the propagation direction of fluid flow, structural features of the channel. The mathematical dependences allowed us to identify the following parameters that influence the degree of local scour at end spillway structures on melioration channels: the rate of flow, the degree of compression of the stream size, flow, shape, and movement of sediment, depth and shape of the supports in the plan and cross section, the shape of the hydrograph, the angle of the jet, duration of standing high water levels in Sadkovskaya balka, etc
-
FOUR MASSIVE THERMAL MODEL OF ELECTRIC DRIVE
DescriptionThis article offers four masses thermal model system that allows you to determine the thermal state of the motor in the brake of the drive
-
Description
Here we present a brief survey of the occurrence of noise in agricultural production while using agricultural machinery and machines with possibility of application of the newest technologies including informational ones. It is well known, that noise is a constant component of all agricultural enterprises and it often indicates the operational condition of equipment and technical culture of enterprises. This is true about both stationary production, such as elevators, grinding plants, feed mills, corn processing plants, and tractors and harvesters. It is natural that above-mentioned mechanisms produce purposeful transformation of the movement. At the same time, any mechanism consists of separate parts that are flexibly joined with each other. In addition, it is due to this fact that the noise occurs. Thus, we should note that due to their design features and complexity of technology itself harvesters a priori are machines that create and produce noise. Noise reduction in machines and equipment is accompanied by increase of labor productivity. Thus, noise protection is an important issue. To reduce the noise a set of measures is applied but not all of them are efficient for selfpropelled machines, including harvesters. Besides, noise is one of the most important indicators of equipment quality, and in some cases, it can be the indicator of the technical level of a machine because it objectively displays inaccuracies in the manufacture of almost all parts. Therefore, noise control is an important problem that has social and economic value
-
SIMULATION OF QUANTUM COMPUTING USING HARDWARE CORES
DescriptionThis article discusses the principles of quantum computing simulation using hardware approach. We describe a general mathematical model of a quantum computer; we show the method of mathematical modeling of quantum computation with optimization and a scheme of a hardware processing core in a quantum computing accelerator. The article gives a method of assessment of increasing productivity in the simulation of quantum computations using computing hardware core. The problems associated with the parallelization of computations on a hardware accelerator, simulating quantum computing were analyzed. The work lists the results of comparison of software and hardware simulation, as well as the dependence of the temporal evaluation of the number of qubits and parallel ALU in the computer-hardware accelerator
-
AUTOMATION DETERMINATION OF HEAT CAPACITY AND THERMAL CONDUCTIVITY OF MATERIALS
DescriptionThe article describes a method for determining the heat capacity from data of differential scanning calorimetry and thermal conductivity of materials, using the DSM-2M and IT-λ-400 instruments with original computer programs
-
Description
The article presents an algorithm of placement of spare parts for a three-level system of storage facilities, we are currently implementing for leading dealer companies of the southern Federal district, based on monitoring of failures in the on-line mode, which is able to prevent the appearance of failures in the process of combine harvesters, and thus to increase their operational reliability