№ 134(10), December, 2017
Public date: 29.12.2017
Archive of journal: Articles count 112, 287 kb
-
USE OF MECHANICAL CLEANING AND COLOR SORTING OF SEED GRAIN AND CORN COBS IN MODERN TECHNOLOGIES
DescriptionSpecial aspects of grain heap and corn cobs trapping by modern mechanisms and plants with photoelements have been considered, also the main ways of their functional developing are disclosed
-
MODERN TECHNICAL EQUIPMENT FOR WORK IN GARDENS
DescriptionGardening is one of the high-value and highly profitable branches of agriculture. However, the level of fruit production in Russia still lags far behind the needs of the population: 20-25 kg of fruits and berries per year are grown per capita, which is a quarter of the minimum consumption rate. Currently, domestic gardening has a low efficiency due to non-compliance with the criteria of world production of fruits. The production of gardens is not competitive enough and does not meet the requirements of the highest quality categories of domestic standards. To increase fruit production, it is necessary to increase the level of intensification of fruit growing using the most valuable varieties and progressive technologies of cultivation. In this article, we consider devices for soil content in orchards, as well as for pruning trees - the main agrotechnical techniques in the technology of growing pomegranate crops that promote the production of stable, optimal harvests of fruit crops. The universal device of fruits is also covered, which makes it possible to reduce labor costs during the laying, care and harvesting of the fruit garden. The wide development of intensive technologies for growing fruits adapted to specific climatic conditions and ensuring a high level of competitiveness and profitability of production is one of the necessary conditions for the further development of gardening in Russia
-
FUNCTIONAL BEVERAGES CONTAINING PECTIN ON BASED ON CABBAGE JUICE
DescriptionThe article presents data on the development of recipes and technologies for the production of functional drinks based on cabbage juice. Theoretical and experimental justification of the selection of ingredients of plant origin for the modeling of drinks with a high content of pectin substances is offered in the article. The use of carrots, beets and cranberries is considered as an additional raw material for the purpose of expanding the range and improving the organoleptic properties of beverages. The fractional composition of pectin substances used in the raw materials was studied. The expediency of introducing concentrates of pectin substances into beverage recipes, which define the functional properties of beverages and their optimal content in the recipes was determined. The characteristics of basic parameters of new drinks based on cabbage juice are given. The results of the study of the complex forming property of the developed beverages, which confirmed their functional orientation, are presented. Experimental studies have shown that the addition of pectin increases the complex forming property of juices. Complex forming ability of cabbage juice with beet pectin in comparison with the control sample and other samples is the highest. Taking into account additional complex of biologically active compounds based on cabbage juice, this product can be used as therapeutic, prophylactic and chemoprotective
-
CONSTRUCTION AND CALCULATIONS FOR DEVICES FOR DRYING CHICKEN MANURE
DescriptionThe article presents innovative technologies and developed methods and devices for drying chicken manure. Ways of their optimization on the basis of screw aggregates and a calculation technique for introduction in production are offered. The results of a long-term research into the search for and development of innovative technologies for the construction of a methodology for calculating not only a device for drying chicken manure with subsequent introduction into production, but also a device for drying bulk materials of agricultural purpose are shown. An example of thermal calculation and selection of the parameters of a drying device is shown on the basis of screw aggregates
-
Description
For different industries, there was a need of creation new equipment and mechanisms with enhanced characteristics. Special requirements are imposed to energetic and mass-dimensional indices of systems of electric drives as one of the main components of such devices. Mass-dimensional and energetic indices due to constructional features and the used management system will allow improving the use of special or controlled asynchronous cascade systems of an electric actuator of axial construction. One of the main difficulties is simulation and design of special systems of the electric drive. In the article, we offer a new approach to determination of magnetic model parameters of the stator of a component of a controlled asynchronous cascade electric actuator of axial construction
-
ALGORITHM FOR OBTAINING MATHEMATICAL MODELS OF ELECTROMECHANICAL DEVICES
DescriptionAn algorithm for obtaining a complex of mathematical models of electromechanical devices, which can then be formalized and implemented in software, is proposed and described. Until recently, the implementation of this algorithm was possible only with the manual derivation of all expressions, which significantly hampered the work of researchers. The appearance of such programs as Maple, Mathematica and MathCAD provided the possibility to automate the process of obtaining analytical calculations that allows calculating any modes of any types of electromechanical devices, reduces the likelihood of errors and allows you to change accepted assumptions and designations in the developed models. The choice of the MathCAD program (in comparison with Maple and Mathmatica) can be justified by the fact that MathCAD has the most convenient interface, allowing not only to perform mathematical calculations, but also to present the results in ordinary mathematical notation. The analytical results obtained in MathCAD can be immediately included in numerical models
-
STRUCTURAL AND PHYLOGENETIC ANALYSIS OF VVMYBA1, VVMYBA2 AND VVMYBA3 GRAPEVINE GENES
DescriptionThe article presents the structural and phylogenetic analysis of VIT_02s0033g00410, VIT_02s0033g00390 and VIT_02s0033g00450 genes of the grapevine genome and the closely related orthologous gene MYB114 of the Arabidopsis genome. These genes are responsible for the biosynthesis of anthocyanin in the organs of model plants and are of interest not only for practical production and breeding, but also for fundamental research. These genes were analyzed for GCcomposition of nucleotides, the presence of cisregulatory elements and promoter regions. DNA and protein sequences were aligned to look for similar elements, which allowed further analysis of the ultraconservative domains of four genes. Based on the results of search and identification of the conservative regions, a cluster tree was constructed, which made it possible to identify the separation of gene sidelines from, presumably, the main one. At the same time, the construction of consensus trees based on DNA and protein sequences revealed their absolute similarity. "The Minimal Evolution Tree" allowed calculating the approximate dates of the appearance of the mutations and the divergence times of the gene branches between each other. At the same time, the appearance of the Vitis genus and its separation from the Rosales was taken as the time first divergence point. In the end, homologous metabolic pathways were searched between grapevine and Arabidopsis, which revealed the presence of homologous proteins in the grape proteome. In this turn, it already confirms the existence of similar biosynthetic pathways and, as a consequence, interactions such as "DNA-protein" and "protein-protein"
-
CONSTRUCTION OF MUTANTS OF BACTERIOPHAGE T4 WITH REDUCED ANTIGENICITY
DescriptionA method of obtaining insertion mutants for the hoc gene, which encodes for the main phage antigen, was developed on the model of bacteriophage T4. This gene was cloned in the plasmid pBSL0+ and was disrupted by insertion of foreign DNA. The phage mutants were obtained by in vivo phage-plasmid recombination. The construction of insertion bacteriophage mutants was carried out in two stages. The resulting mutants on this procedure could be grown on wild-type E. coli strains, which is convenient for the production and use of these phages in therapy. The mutants obtained had reduced antigenicity. At the same time, the yield of the mutant strains was high when they were grown on the non-suppressor E. coli laboratory strains. A number of stages of purification of the bacteriophage mutants obtained were performed. Preparations have been studied by transmission electron microscopy and mass spectrometry. By several periodic cultivations of the mutant bacteriophages, it was shown that mutations of this type are stably maintained during more than 50 generations. T4 related bacteriophages of the family Myoviridae, for example, T-even, have the significant homology amongst their genomes, which makes possible to produce similar mutants. Thus, our method was developed to obtain mutants with reduced antigenicity which can be used for both the treatment of systemic infections, and diarrhea in the case, when, bacteriophages penetrate into the bloodstream. Such phages can be used in medicine and veterinary. The reported study was partially supported by RFBR, research projects No. 13-04-00991, 16-44-230855
-
SPECIFICITY OF HEAVY METALS ACCUMULATION IN STEVIA REBAUDIANA
DescriptionThe analysis of the accumulation and distribution of heavy metals in the stevia raw material grown in different agroecological regions is carried out. The elements present in the soils always have a complex effect on the plant and at the same time enhance or weaken each other's action. Plants of stevia are able to regulate the flow of the heavy metals under study, assimilating organs accumulate the optimal number of elements necessary for their growth and development, regardless of the growing conditions
-
Description
This article presents the results of testing IRAP DNA markers Cass1 and Cass2 applied to Prunus spinosa. The findings suggest the high perspectiveness of their using for the study of genetic diversity of the gene pool of this species. According to the results of the analysis of the sample 12 genotypes were identified from 6 to 13 fragments in the spectrum of Cass1 and from 5 to 11 fragments for Cass2. As a result of cluster analysis in the sample formed three groups of samples. In one of the groups, which is most distant from the other two, includes samples taken in Ukraine, while the remaining two groups included samples from Armenia, the Krasnodar region region, the Republic of Adygea, Ukraine and Moldova, and three cultural large-fruited form. The distribution of samples in clusters corresponded to their geographical origin that favors the objective assessment of genetic distances between the samples using Cass1 and Cass2 markers. Thus, it was concluded that the prospects of using DNA markers to study the genetic diversity within a species of Prunus spinosa