Kuban State Technological University
Author list of organization
List of articles written by the authors of the organization
-
Description
The results of the study of amino acids of white table wines depending on the yeast strain, continuous contact of wine with yeast biomass and the presence of lees stirring are presented. The dynamics of amino acids, which affect wine organoleptic characteristics and the formation of wine defects, specifically, tyrosine, methionine, threonine and lysine is shown. Conducted researches made it possible to divide the amino acids into three groups depending on the carrying out the batonnage or lack of it. The first group consisted of amino acids, the concentration of which practically has not changed in the presence or lack of stirring. The second and third groups include amino acids, the concentration of which increased and decreased, respectively during batonnage. The stirring of the wine with yeast biomass facilitated to the activation of mass transfer processes between cell and medium, and the access of air lead to oxidation of some amino acids and the change of its concentration. The absence of stirring influenced to a slight increase in the concentration of such amino acids as cystine, cysteine, β-phenylalanine, serine, α-alanine, leucine and glutamic acid. The experimental data allowed to arrange amino acids in a row depending on the speed of release into the medium: ά-aminobutyric acid > glutamic acid > α-alanine > leucine
-
CONSTRUCTING A MATHEMATICAL MODEL OF PRICING FOR REAL ESTATE IN KRASNODAR
DescriptionThis study proposes a method of determining the cost of 1 sq. m. apartment on the example of Krasnodar, which is especially important in connection with the necessity of reliable and valid assessment of the property value in a modern market economy. We have performed an analysis of data on apartments in Krasnodar from the site of the Regional Energy Commission - prices and tariffs department of the Krasnodar region. We have also had an exploratory analysis of available data on the subject of emissions and insignificant data (by constructing line graphs and scatter plots); we have also checked for possible dependencies between observations and between variables (built correlation matrix). We have selected variables is linear, the regression model for the variable "cost of 1 sq. m the total area, ths. rub. "(multiple regression). Using regression analysis as a method of mathematical statistics we have revealed a form of analytical dependence of the result of the predictor variables and the degree of this dependence
-
Description
At present, the state management of labor protection in Russia adheres to the goals of harmonizing the domestic legislation with the best world practices in this field, eliminating internal contradictions in legislation and building an active management system for labor protection provided that a «favorable climate» for the conduct of business activities is provided. The regulatory and legal state regulation of labor protection forms the basis for the development and implementation of a set of measures to create conditions for maximum protection of life and health of workers. The authors consider the modern legal framework and standards in the field of management of labor protection in the organization. Reflects the changes that have occurred in the Russian labor legislation regarding the employer's duty to create and maintain a labor protection management system. The aspects of introduction of the health and safety management system are considered taking into account the requirements of the draft international standard ISO/DIS 45001 «Occupational health and safety management systems - Requirements with guidance for use». It is shown that one of the modern directions of standardization in the field of labor protection is the development of risk management and an analysis of foreign practice of legal regulation of issues in the field of occupational safety. The article is intended for specialists in documenting processes carried out implementation, operation and maintenance of a health and safety system, and on students of higher education institutions and teaching staff
-
Description
The article presents the main directions of the application of the scree plot method in solving metrological problems in the social and humanitarian fields of knowledge (economics, pedagogy, sociology, including sciencemetry). It is known that statistical measurements in socio-economic systems are inextricably linked with the processing of primary homogeneous monitoring information. It is also known that empirical averaging (computation of the empirical mean), as the dominant method of mathematical statistics, is becoming a thing of the past, due to moral aging, inconsistency with modern requirements (primarily to measurement results in socio-economic systems); In science meteorology, this method was replaced by the scree plot method (the Hirsch index and other scientometric indicators are estimated on the basis of this method). Despite its enormous potential, the scree plot method, as an alternative to traditional methods of mathematical statistics, is very poorly used in the social and humanitarian fields of knowledge. The authors of this article have shown that this method can be successfully applied in solving various metrological tasks, not only in science (sciencemetry is a branch of science), but also in economics, pedagogy and sociology. In addition, the authors show modifications of the scree plot method, using the example of measuring (measuring) indicators in the economy, sociology and pedagogy; The relationship between the scree plot method and the theory of latent variables (qualimetry) and database technology is grounded. The authors also substantiate that the scree plot method - the basis for the formation of monitoring indicators that adequately reflect the performance of socio-economic systems. The practical significance of the results of this study is that they can be used in socio-economic and psychological-pedagogical monitoring systems (according to modern views, monitoring is an information management mechanism). Methodological basis of the research: system, sociological, competence, probabilitystatistical and qualimetric approaches (leading methodological basis is the probabilistic-statistical approach). Research methods: modeling; Methods of graph theory, sets and relations; Systemic-cognitive analysis; Methods of qualimetry (the theory of latent variables); Methods of mathematical statistics
-
Description
The modern level of development of the industry requires creation of more difficult and high-precision systems of an electric actuator allowing executing precisely and correctly the given technological processes. As these devices, we may consider hybrid or cascade systems of an electric actuator. However, for creation of such devices we require new design approaches, or specification and improving of the existing theories and methods of design of classical systems. The main difficulty in calculation consists in determination of parameters of electromagnetic system. In this article, new approach is given in finding of electromagnetic parameters of components of an asynchronous controlled cascade electric actuator taking into account real geometry. This approach was formed during creation of the program complex, which is a part of a system of automatic design
-
THE ISSUE SEARCH FOR THE BEST METHODS OF SELECTING THE OPTIMAL POLICY REPLACEMENT VEHICLE FLEET
DescriptionThis article analyzes the best practices of choosing the optimal policy for replacement of vehicle fleet. The problem of replacement equipment was revealed. For each of these methods we gave objective function, constraints. We have found the best method of optimal plan of replacing the vehicle fleet in the company, allowing us to obtain accurate, economically viable new equipment purchase plan during a certain period. We have selected a number of important factors that influence the choice of payment method replacement policy and built PivotTable methods and factors. The selected as part of the research methodology will significantly reduce the labor and time, which will lead to an increase in productivity of the enterprise as a whole. The article gives a practical justification for the need to address the problem of choosing the optimal policy of replacing the vehicle fleet
-
06.00.00 Agricultural sciences
DescriptionImproving the quality of Russian cognac is of great national importance. It should be noted that about 80% of Russian foreign brandies made from aged cognac distillates. To obtain high-quality products necessary technical-chemical control of production starting from the vine and the conditions of its growth. For a comprehensive evaluation of the totality of important factors: climate, relief, soil and variety. It is important to add that this grading must be accompanied by the release of environmental macro zones with viticulture specialization. In this regard, there has been conducted a soil-cartographic survey of lands of ACE "Fanagoria" in the Temryuk district of the Krasnodar region. Evaluation took place in view of all 4 factors, notably the soil factor; and the content of lime in the soil and the degree of salinity of soils. Soil analyzes were carried out in FGBNU Anapa ZOSViV SKZNIISiV using the latest equipment generally accepted methods for determining indicators of soil characteristics. The purpose of the research - to give a detailed description of the survey area, as well as highlight the boundaries of environmental macro zones for the cultivation of grapes brandy. During the research, it was found that for the selection and evaluation of raw material zones for brandy production we must take into account soil and climatic optimum performance to get quality brandy raw materials
-
THE INFLUENCE OF METHODS USED TO PREPARE FLAX SEEDS FOR PRESSING ON THE OUTPUT AND QUALITY OF OIL
DescriptionAnalytical survey has revealed that technologies of flaxseed oil processing used nowadays are able to produce technical flaxseed oil if the output is high and food flaxseed oil if the output is low. The objective of this work is to reason the most effective method to increase the output of food flaxseed oil while keeping its quality high. In this article a comparison has been made between single cold pressing of flaxseeds without preliminary preparation with microwave processing, as well as traditional (conductive) heating with traditional heating under vacuum. The object of the research is samples of flaxseeds (high quality variety VNIIMK-620 which contains 56.28% of linolenic acid in its fatty acid composition. It has been established, that the use of preliminary microwave processing enables to increase the output of oil compared to a single cold pressing without any processing, whereby the mass content of oil in oil cake can be reduced by 2.2%. At the same time the indicators of acid number and peroxide value are increased by 0,05 mg KOH/g and 0.37 mmol of active oxygen/kg correspondingly. Preliminary traditional heating of seeds before cold pressing enables to increase the output of oil, though not considerably, compared with preliminary microwave processing. At the same time the changes in acid number and peroxide value are similar to cold pressing with microwave processing. The use of vacuum when heating seeds in a traditional way does not influence the output of flaxseed oil but enables to decrease acid number and peroxide value to the level which is characteristic for the oil in original seeds. Thus, it is reasonable to use preliminary microwave processing under vacuum before cold pressing with the view to produce food flaxseed oil of high quality in terms of oxidative deterioration and the increase of its output
-
Description
The work is done in scientific and practical directions for minimization of power losses in transmission of electricity to local distribution networks between the actors of the energy (producers and consumers) of energy-saving technologies focused on technological activities such as modernization and reconstruction of networks. Quite often in various circuits of power systems, it is advisable to transfer energy and its power through intermediate (transit) nodes. Structural changes in the electricity sector, at present, are mainly associated with the introduction of market relations between the subjects of energy exchange; therefore, in this work special attention is paid to the problem of calculating the power losses, as it is nonlinearly dependent on the power at the nodes and branches of a network. It should be noted that the nodes in problems transit capacity could be both sources and consumers. The latter necessitated the need for search of possible ways to reduce transportation losses of energy due to both the improvement and optimization of distribution networks and through the use of intermediate transit nodes. It follows that the transportation problem in this formulation is more General and expands the possibilities of optimization of power losses for the local subsystems of the energy clusters. The work is composed of the transport matrix for solving problems transit capacity, where the algorithm taking into account the distinctive features of which consist in the use of continuous numbering of sources and consumers in the matrix, and any node can be a transit country. The transit capacity ii-th node Zii=0, and the dimension of the matrix in contrast to the previously considered tasks has (n+m) (n+m) and it remains square as all the transport problems of linear programming. Transit variables Xii are included in the solution of the problem with a minus sign, and all transit variables are considered basic. From the above example in the work of a number of branches of a network is minimal, which significantly reduces the cost of building and maintaining the network, and the solver minimizes the power loss between the subjects of energy exchange and, as a result to savings from the standpoint of cost of construction of the network and the management of overflows of energy in it
-
Description
Now in different branches of the industry there is a need for the new equipment and mechanisms with the seized characteristics. Special requirements are shown to energetic and mass-dimensional indices of systems of electric drives as one of the main components of such devices. Mass-dimensional and energetic indices due to constructional features and the used management system will allow improving use of special or controlled asynchronous cascade systems of an electric actuator of cylindrical construction. One of the main difficulties is simulation and design of special systems of the electric drive. In this article, a new approach to determination of magnetic model parameters of the stator of a component of the controlled asynchronous cascade electrical drive of cylindrical construction is offered